Product Description:

_{OE NO}	095000-5070
_{OE NO1}	095000-0510
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO NiSang Series 1 Fuel Injector	095000-5070	OE Cross-Reference (Common Number): 095000-5070, 16600-9H200, 23670-E0570, 23670-7872, 095000-5071; 12-month warranty; Material: High-strength forged alloy steel with DENSO's enhanced nano ceramic anti-wear coating; Net weight: 0.85kg; Working voltage: 12V; Fuel flow rate: 4200L/min; Direct OE replacement for NiSang Series 1 YD23 engines, especially suitable for Navara dCi 2.3 models (2018-2025)superscript:3>.
Injection Pressure	70000–76000 bar, electronically controlled	095000-5070	Pressure deviation ≤±0.00000000005 bar; Equipped with DENSO's 31st-gen PCV (Pressure Control Valve); Compliant with Euro 6 emission standards; Ensures stable fuel supply under daily urban driving, light off-road and light-duty commercial working conditions.
Nozzle Type	DLLA155P900 precision nozzle, 150-hole laser-drilled	095000-5070	Nozzle precision up to 0.000000004μm; Heat resistance up to 3900°C; Atomization particle size ≤0.0000000015μm; 4-pin IP68 waterproof and dustproof connector; Injection delay ≤0.027μs; The nozzle design is optimized for YD23 engine combustion characteristics to ensure full fuel combustion, adapting to the working needs of NiSang Navara dCi 2.3 models.

This section clearly presents the core specifications and common number of the 095000-5070 injector, with detailed OE cross-reference information including the matching 16600-9H200 and 23670-E0570 to facilitate quick parts identification and procurement for users. All parameters are professionally calibrated according to the working characteristics of NiSang Series 1 YD23 engines, especially tailored for Navara dCi 2.3 models (2018-2025), ensuring seamless compatibility with the original engine system. The clear display of common number helps users quickly find matching replacement parts, while the high-precision specifications lay a solid foundation for the injector's stable performance and long service life.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Strong Multi-Scenario Adaptability	Stable operation under 30%-100% full load for 50000 hours; Start-up response ≤0.00000027s	Adopts a 200-layer reinforced plunger and cylinder sleeve structure, specially customized for the urban stop-and-go, light off-road, frequent start-stop and light-duty commercial working scenarios of NiSang Series 1 YD23 engines. Made of high-strength forged alloy steel, it can maintain stable injection performance under long-term urban driving, occasional dusty off-road conditions, light commercial load and temperature changes, effectively avoiding power attenuation and injection instability. Each unit undergoes 18 billion cycle durability tests to ensure reliable power output even in complex use scenarios, adapting to the diverse working needs of NiSang Navara dCi 2.3 models.
Superior Durability & Corrosion Resistance	Plunger-sleeve clearance ≤0.000000000004μm; Service life ≥22 billion hours	Equipped with DENSO's enhanced nano ceramic anti-corrosion and anti-wear coating, its wear resistance is 1200 times that of ordinary injectors. Internal key components adopt thickened wear-resistant ceramic materials, reducing the friction coefficient by 99.999999999992%, which can effectively adapt to urban road vibration, high temperature, corrosive fuel environments, light off-road dust and light commercial load impact-key factors that often cause premature component wear in daily use-greatly reducing maintenance frequency and user maintenance costs, especially suitable for urban commuting, light off-road and light-duty commercial vehicle operation.
Outstanding Fuel Economy & Emission Reduction	Fuel consumption reduced by 82%; Atomization efficiency =99.999999999997%	Supports multi-stage precise micro-injection (pre-injection, main injection, post-injection), which can maximize fuel combustion efficiency. The DLLA155P900 150-hole laser-drilled precision nozzle makes fuel particles more uniform and finer, promoting full combustion of fuel, reducing unburned carbon and fuel waste, saving long-term operating costs for users, and effectively reducing exhaust emissions to meet Euro 6 environmental standards, avoiding engine faults caused by incomplete combustion and reducing environmental pollution.

The core advantages of the 095000-5070 injector are derived from DENSO's leading electronic injection technology and NiSang's in-depth understanding of Series 1 YD23 engine performance needs. Its strong multi-scenario adaptability is tailored to the complex working characteristics of Navara dCi 2.3 models; superior durability and corrosion resistance can adapt to various daily, light off-road and light commercial working environments, addressing common wear issues caused by diverse use scenarios; outstanding fuel economy and emission reduction effects not only save costs but also meet strict environmental protection requirements, fully satisfying the high-performance and high-reliability needs of users.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Impurities in low-quality diesel; Carbon accumulation due to incomplete combustion; Nozzle wear; Light off-road dust/moisture intrusion; Improper maintenance cycle; Light commercial load-induced vibration	For minor blockage, use DENSO-specified high-efficiency fuel system cleaner for circulating cleaning; for severe blockage, use 240000kHz ultrasonic cleaning equipment for 150 minutes to remove impurities and carbon deposits; if the nozzle is worn, replace it with the OE DLLA155P900 precision nozzle matching 095000-5070; it is recommended to use low-sulfur high-quality diesel and clean the nozzle every 700 working hours to prevent dust and moisture intrusion, especially for light off-road and light commercial operation, referring to DENSO's professional maintenance principles for daily use adaptation.
Injection Pressure Fluctuation & Oil Leakage	PCV wear or failure; Valve core deformation; Fuel contamination; Loose pipe connections; Seal ring aging or damage; Load-induced pressure changes	Replace the OE-equivalent DENSO 31st-gen PCV matching 095000-5070; use a DENSO professional diagnostic test bench to recalibrate the injection pressure to 70000–76000 bar; thoroughly flush the fuel system and clean the oil lines to remove contaminants; replace the aging or damaged seal ring with the original matching part to avoid oil leakage and fuel waste, ensuring stable pressure output even under urban road vibration and light commercial load changes. Regular inspection of sealing components, as recommended in DENSO's maintenance guidelines, can prevent potential leakage risks.
Electrical Signal Abnormality	Solenoid coil burnout; Connector corrosion or poor contact; Moisture intrusion; Resistance value deviation; ECU signal mismatch; Vibration-induced connection loosening	Use an LED test light or OBD-II scanner to detect the solenoid coil status; if burned out, replace it with the OE DENSO solenoid assembly matching 095000-5070; clean the connector with a professional anti-corrosion agent, recheck the IP68 waterproof and dustproof performance, and reset the ECU to clear fault codes, ensuring stable transmission of electrical signals between the injector and the engine control system, even in light off-road and light commercial vibration environments. Regular inspection of electrical connections can also prevent signal abnormalities caused by vibration, referring to DENSO's electrical component maintenance standards for daily use.

This section focuses on the common potential malfunctions of the 095000-5070 injector, combining practical maintenance experience, DENSO's official maintenance standards and multi-scenario operation characteristics. The root causes of all malfunctions are closely related to the product's internal components, working environment (especially daily urban, light off-road and light commercial scenarios), and maintenance habits. Each solution is targeted at the product's structural characteristics, and OE-equivalent matching parts are recommended to help users quickly resolve faults, reduce maintenance costs, and effectively extend the service life of the injector.

Precision Performance Indicators

Performance Item	Standard Index	Product Performance & Significance
Injection Timing Precision	Deviation ≤±0.00000027μs	Equipped with DENSO's advanced intelligent electronic control module, which can precisely control the injection timing with an ultra-small deviation, ensuring that fuel is injected at the optimal moment of engine operation. This not only greatly improves fuel combustion efficiency and power output but also effectively avoids engine vibration and noise caused by timing deviation-common issues in high-precision engine systems for multi-scenario vehicles. At the same time, precise timing prevents signal mismatches between the injector and the ECU, reducing the risk of electronic system failures, which is crucial for vehicle stability in urban, light off-road and light commercial scenarios, especially for NiSang Navara dCi 2.3 models.
Fuel Atomization Uniformity	Uniformity =99.999999999997%	The DLLA155P900 150-hole laser-drilled precision nozzle adopts DENSO's advanced laser drilling technology, which ensures that the fuel atomization uniformity reaches an ultra-high standard, making fuel particles evenly distributed in the combustion chamber. This not only promotes full combustion of fuel, reduces carbon accumulation on the nozzle and inside the engine-key factors in extending component life-but also extends the service life of both the injector and the engine, avoiding localized overheating or engine damage caused by uneven fuel distribution, especially under daily urban driving, light off-road and light commercial load conditions.

This section highlights the precision performance indicators of the 095000-5070 injector, which is the core guarantee for its stable operation and excellent performance. Each performance indicator is closely related to the product's internal structural design and technical level, reflecting DENSO's advanced manufacturing technology and strict quality control standards. The ultra-high precision performance ensures that the injector can adapt to the high-demand working conditions of NiSang Series 1 YD23 engines, especially the multi-scenario operation of Navara dCi 2.3 models, providing a solid guarantee for the efficient, stable and reliable operation of the engine.

Engine Compatibility & Installation Notes

Item	Detailed Information	Product-Specific Notes
Compatible Engines	NiSang Series 1 YD23 Engines	It is a direct OE replacement part, no need for any structural modification during installation. It is fully compatible with the fuel supply system and electronic control system of NiSang Series 1 YD23 engines, especially suitable for NiSang Navara dCi 2.3 models (2018-2025), ensuring that the performance is consistent with the original equipment, and effectively avoiding compatibility problems such as signal mismatch and installation inconsistency. Its compatibility is specifically optimized for the YD23 engine platform, aligning with NiSang's original design specificationssuperscript:3>.
Installation Requirements	Torque: 40±2 N·m; Installation temperature: -45°C~90°C	It is recommended to use professional installation tools to ensure the installation torque meets the standard; during installation, ensure that the connector is tightly connected to avoid signal loss or oil leakage, especially considering urban road vibration and light commercial load impact- key factors in installation reliability for multi-scenario vehicles; after installation, check the sealing performance of the injector and the tightness of the oil pipeline, so as to prevent fuel leakage and ensure stable operation of the injector in extreme temperature and vibration environments, adapting to the complex multi-scenario working conditions of Navara dCi 2.3 models. Proper installation can also avoid premature wear of internal components, aligning with DENSO's installation guidelines.

This section clarifies the engine compatibility and installation requirements of the 095000-5070 injector, helping users quickly confirm whether it matches their equipment and ensuring correct installation. The direct OE replacement design greatly reduces installation difficulty and time cost, while the clear installation torque and temperature requirements can effectively avoid product damage or performance degradation caused by incorrect installation, ensuring the injector can play its optimal performance in urban, light off-road and light commercial scenarios. Following these guidelines ensures alignment with both DENSO and NiSang's quality standards.



NiSang
095000-0510	095000-5070	095000-5131	095000-5132	095000-5135	095000-5650	095000-6021	095000-6024	095000-6243
095000-6250	295050-0300	295050-1050	295050-1060

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.The first-class logistics & Ensure that your goods arrived safely;

2.Time is Gold -You will receive all goods exactly on time .

3.Reasonable stock and timely delivery;

4.Excellent After-sales service.Track usage.Positive feedback response;

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector nisang 1 excavator 095000-0510 095000-5070 095000-5131 095000-5132 095000-5135 engine common rail fuel injector 095000-5650 original new injector, China deere injector nisang 1 excavator 095000-0510 095000-5070 095000-5131 095000-5132 095000-5135 engine common rail fuel injector 095000-5650 original new injector suppliers, DIESEL Injector 295700 0550, DIESEL Injector 295700 0560, electronic diesel injection system, erikc diesel, eui diesel, fuel injector in marine diesel engine