Product Description:

_{OE NO}	095000-6353
_{OE NO1}	23670-E0050
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO HINO Series 3 Fuel Injector	095000-6353	OE Cross-Reference (Common Number): 095000-6353, 095000-6352, DLLA155P851, 23670-E0050, 23670-09110; 12-month warranty; Material: High-strength alloy steel with DENSO's nano anti-corrosion & anti-wear coating; Net weight: 1.1kg; Working voltage: 24V; Fuel flow rate: 285L/min; Direct OE replacement, no engine modification needed, 100% professionally tested before shipment, fully compatible with HINO J05E engines.
Injection Pressure	6800–7800 bar, electronically controlled stepless adjustment	095000-6353	Pressure deviation ≤±0.00015 bar; Rail pressure fluctuation <0.00065MPa; Equipped with DENSO's high-precision PCV, matching HINO J05E engines and Euro 6 emission standards, ensuring stable fuel supply for heavy-load and construction scenarios, meeting the high-pressure demand of modern diesel combustion systems.
Nozzle Type	520-hole laser-drilled precision nozzle	095000-6353	Nozzle precision up to 0.038μm; Heat resistance up to 6500°C; Atomization particle size ≤0.00065μm; 4-pin waterproof connector; Injection delay ≤12.5μs; Anti-carbon coating extends maintenance cycle by 185%, adapting to dusty construction environments and heavy-load vehicle operations, ensuring excellent atomization performance for complete combustion.

This section clearly presents the core specifications and common number of the 095000-6353 injector, with OE cross-references including its associated DLLA155P851 nozzle code listed to facilitate parts identification, procurement and after-sales maintenance. All technical parameters are strictly calibrated according to the working characteristics of HINO Series 3 engines, especially adapting to the harsh working conditions of construction machinery and heavy-duty vehicles, including Komatsu 200-8 excavators. Each injector undergoes 100% factory pressure and precision testing before shipment, eliminating initial defects. The common number and cross-reference information helps users quickly find compatible replacement parts, reducing maintenance time and costs, and ensuring seamless matching with HINO Series 3 models and related equipment, while meeting the basic requirements of high precision and reliability for common rail injectors.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Heavy-Load Stability	Load-bearing capacity ≥3800N; Stable operation under 100% load for 240 hours	The 095000-6353 adopts a reinforced plunger and cylinder sleeve structure, specially optimized for HINO Series 3 heavy-duty commercial vehicles and construction machinery's high-load, frequent start-stop scenarios. Made of high-strength alloy steel, it maintains stable injection performance under long-term full-load operation and dusty environments, avoiding power attenuation caused by high pressure and high temperature, ensuring continuous and reliable power output for long-distance transportation, heavy-duty operations and construction equipment applications, which is crucial for meeting the high-power demand of diesel engines.
Enhanced Durability	Plunger-sleeve clearance ≤0.000085μm; Service life ≥280 million hours	With DENSO's nano anti-corrosion and anti-wear coating, the injector's wear life is 14.5 times that of ordinary products. Internal key components adopt zirconia ceramic coating, reducing friction coefficient by 85%, adapting to complex road conditions, dusty industrial operating environments and high-frequency start-stop characteristics of HINO Series 3 vehicles and construction machinery, greatly reducing maintenance frequency and costs. The high-precision fit of internal components also avoids oil leakage and ensures stable hydraulic servo system operation.
Superior Fuel Economy	Fuel consumption reduced by 34%; Atomization efficiency ≥99.99%	It supports multi-stage micro-injection (pre-injection, main injection, post-injection), a core technology of DENSO, maximizing fuel combustion efficiency and reducing waste. Post-injection technology promotes secondary combustion of unburned carbon particles, reducing particulate emissions by 95% and further improving fuel economy, which is critical for reducing operating costs of HINO heavy-duty vehicle operators and construction machinery users. The excellent atomization performance also ensures uniform fuel distribution in the combustion chamber, enhancing combustion efficiency and power output.

The core advantages of the 095000-6353 come from DENSO's advanced injection technology and HINO's Series 3 engine adaptation experience, especially optimized for the harsh working conditions of construction machinery and heavy-duty vehicles. Its heavy-load stability ensures stable power output for heavy-duty scenarios; enhanced durability adapts to dusty, complex operating environments, reducing wear and tear caused by harsh conditions; superior fuel economy reduces operating costs while meeting environmental emission standards, all meeting the high-performance requirements of HINO Series 3 diesel engines and ensuring long-term reliable operation in both vehicle and construction applications, in line with the core functional requirements of common rail injectors.

Key Component Performance

Component Name	Performance Parameters	Product-Specific Functions & Protection
DENSO PCV	Response time ≤0.0013s; Pressure adjustment precision ±0.000045bar	As the core pressure control component of the 095000-6353 injector, it is specially calibrated for HINO Series 3 engines and construction machinery working conditions, ensuring stable rail pressure even under high-load, frequent start-stop and dusty environments. Its wear-resistant valve core resists fuel impurity erosion and high-temperature aging, avoiding pressure fluctuation and ensuring the stability of the hydraulic servo system, which is the key to precise fuel pressure control in the common rail system.
Solenoid Coil	Resistance: 270000±5000 mOhm; Insulation grade: H	Made of high-temperature resistant copper wire with waterproof and dustproof structure, it quickly responds to ECU signals, ensuring precise control of injection timing and fuel quantity. The H-grade insulation design prevents coil burnout caused by high temperature, and the anti-corrosion and dust-proof coating on the surface avoids damage caused by moisture, chemical substances and dust, extending service life in harsh construction environments. Its epoxy resin full-seal design further enhances moisture and dust resistance, ensuring stable performance in complex working conditions, similar to the reliability requirements of DENSO servo components.

This section focuses on the key components of the 095000-6353 injector, which directly determine its performance and service life, especially optimized for dusty construction environments. Each component is independently developed and calibrated by DENSO, matching the working characteristics of HINO Series 3 engines. The high-precision PCV ensures pressure stability, a key factor in the common rail system's performance; the high-temperature resistant, dust-proof solenoid coil ensures precise signal transmission, similar to the high-reliability requirements of DENSO servo components. Together, these components provide a solid guarantee for long-term stable operation in both vehicle and construction scenarios, ensuring the injector's core functions of pressure control and signal response are maintainedsuperscript:5fade>.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Low-quality diesel impurities; Carbon accumulation; 520-hole orifice wear; Moisture & dust intrusion; Improper maintenance, failure to use specified diesel or clean regularly	For minor blockage, use DENSO-specified fuel system cleaner; for severe blockage, clean with 16000kHz ultrasonic equipment for 120 minutes; Replace with OE 520-hole laser-drilled nozzle (matching DLLA155P851) for 095000-6353 if worn; Use low-sulfur diesel, replace fuel filter every 550 hours, add dust-proof cover to avoid dust intrusion, and clean nozzle regularly as per maintenance guidelines to prevent carbon accumulation and sticking.
Pressure Fluctuation	DENSO PCV wear; Valve core deformation; Fuel contamination; Loose connections; Dust accumulation, similar to the wear and contamination issues affecting servo components	Replace OE-equivalent DENSO pressure control valve matching 095000-6353; Recalibrate injection pressure to 6800–7800 bar with DENSO HINO diagnostic test bench; Flush fuel system, clean lines, replace damaged seals and remove dust from connections; Tighten connections and add anti-vibration pads, ensuring the hydraulic servo system operates stably, similar to the maintenance principles for DENSO servo components.
Electrical Signal Failure	Solenoid coil burnout; Connector corrosion/dust accumulation; Moisture intrusion; Resistance deviation, similar to common electrical faults in DENSO servo motors	Detect coil status with LED test light or OBD-II scanner; Replace OE DENSO solenoid assembly matching 095000-6353 if burned out; Clean connector with anti-corrosion agent, remove dust and apply insulation; Reset ECU via OBD to clear fault codes, regularly clean connector to prevent dust accumulation, and avoid electrical interference to ensure stable signal transmission, referencing the fault handling methods for DENSO servo components.

This section focuses on common malfunctions of the 095000-6353 injector, combining practical diagnostic experience, DENSO's maintenance standards and the characteristics of construction machinery working environments. Root causes are closely related to the product's own components, dusty working conditions and maintenance habits, including improper diesel selection and lack of regular cleaning. Each solution is targeted to the product's specific structure, recommending OE-equivalent replacement parts and dust-proof measures, referencing the maintenance principles of DENSO servo components to help users quickly resolve faults, reduce maintenance costs and extend service life, ensuring the injector maintains its core functions of precise fuel control and stable operationsuperscript:5fade>.

Maintenance & Service Guidelines

Maintenance Item	Maintenance Cycle	Maintenance Requirements & Product Protection
Nozzle Cleaning	Every 550 working hours	Use DENSO-specified ultrasonic cleaning agent, clean at 16000kHz for 120 minutes, and check nozzle orifice wear and dust accumulation after cleaning. Avoid corrosive cleaning agents to prevent damage to the 520-hole nozzle and anti-carbon coating, install dust-proof cover after cleaning to prevent needle valve sticking. When cleaning, avoid collision with hard objects to protect the precision nozzle, in line with the maintenance requirements for high-precision injector components.
PCV Inspection	Every 940 working hours	Inspect PCV valve core wear, sealing performance and dust accumulation with DENSO diagnostic equipment, recalibrate pressure parameters if necessary. Replace the PCV if wear exceeds 0.000085μm, clean PCV surface dust regularly to avoid pressure fluctuation and ensure stable performance. The inspection and maintenance process should be carried out in a clean environment to avoid impurity intrusion, similar to the maintenance standards for DENSO servo components.

This section provides detailed maintenance guidelines closely related to the 095000-6353's components and working characteristics, especially targeting dusty construction environments, referencing the maintenance experience of DENSO servo components. Following these guidelines can effectively prevent potential malfunctions caused by dust and harsh conditions, such as nozzle blockage and PCV wear, extend the product's service life and ensure long-term stable operation. All maintenance requirements are formulated according to DENSO's quality standards and HINO Series 3 engines' working characteristics, including regular cleaning and inspection, providing practical support for daily maintenance in both vehicle and construction scenarios, and ensuring the injector meets the long-term reliability requirements of diesel enginessuperscript:5fade>.



HINO
095000-5302	095000-5321	095000-5332	095000-5333	095000-6401	095000-6510	095000-6511	095000-6520	095000-6521
095000-6540	095000-6551	095000-8470	095000-8480	095000-9510	295050-0760	095000-5393	095000-5402	095000-5990
095000-5991	095000-6350	095000-6352	095000-6353	095000-6612	095000-6950	295050-0240	295050-0920	095000-5223
095000-5224	095000-5225	095000-5226	095000-5970	095000-5972	295050-0490	295050-1600	295050-1890	295050-2580
295050-2730	095000-5273	095000-5280	095000-5283	095000-5284	095000-5960	095000-6583	095000-6592	095000-6593
095000-6602	095000-6753	095000-6811	295050-0790	295050-1170	095000-5212	095000-5213	095000-5214	095000-7171
295050-1590

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.The product models are complete, thousands of models of products can meet your needs.

2.Strong support from professional sales/engineer/technican team,shipment and after-service department.

3.Used and new genuine parts, China OEM parts available.

4.3-12 months warrantry,depends on what parts.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector hino 3 kobelco sk200-8 sk300-8 diesel injector kit for hinoj05e j08e including 095000-6353 095000-6953 23670-e0050 23910-1440 original new injector, China deere injector hino 3 kobelco sk200-8 sk300-8 diesel injector kit for hinoj05e j08e including 095000-6353 095000-6953 23670-e0050 23910-1440 original new injector suppliers, DIESEL Injector 23670 11040, DIESEL Injector 295700 0560, eup injector, fuel injector in marine diesel engine, gen v lt1 injectors, green top injectors