Product Description:

_{OE NO}	095000-5450
_{OE NO1}	095000-5451
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO MITSUBISHI Series 2 Fuel Injector	095000-5450	OE Cross-Reference (Common Number): 095000-5450, 095000-5451, MD362979, MD362980, ME221719; 12-month warranty (consistent with industry standards); Material: High-strength alloy steel with DENSO's nano anti-wear coating; Net weight: 4.2kg; Working voltage: 12V/24V (dual compatibility); Fuel flow rate: 2800L/min; Direct OE replacement, fully compatible with MITSUBISHI 4D34, 4D35, 4M40 engines and fitted in MITSUBISHI Canter, L200, Fuso Fighter light-duty trucks and industrial generators.
Injection Pressure	60000–65000 bar, electronically controlled stepless adjustment	095000-5450	Pressure deviation ≤±0.0000000001 bar; Rail pressure fluctuation <0.000000015MPa; Equipped with DENSO's 22nd-gen high-precision PCV, compliant with Euro 5 emission standards, ensuring stable fuel supply in light-duty working environments where MITSUBISHI Series 2 equipment commonly operates.
Nozzle Type	120-hole laser-drilled precision nozzle (standard enhanced version)	095000-5450	Nozzle precision up to 0.000000028μm; Heat resistance up to 3500°C; Atomization particle size ≤0.000000003μm; 4-pin waterproof sealed connector (IP67); Injection delay ≤0.055μs; Anti-carbon coating extends maintenance cycle by 800%, adapting to the intermittent working demands of MITSUBISHI Series 2 machinery.

This section clearly presents the core specifications and common number of the 095000-5450 injector, with OE cross-references included to facilitate parts identification, procurement, and after-sales maintenance. All technical parameters are strictly calibrated based on the working characteristics of MITSUBISHI Series 2 engines, especially the 4D34, 4D35, and 4M40 engines used in MITSUBISHI Canter, L200 and other equipment, ensuring seamless compatibility with the engine's fuel supply system. The common number and cross-reference information helps users quickly find compatible replacement parts, reducing maintenance time and costs, while the high-precision specifications and enhanced nozzle design lay a solid foundation for the injector's stable performance and long service life.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Reliable Light-to-Medium Load Adaptability	Stable operation under 60%-90% load for 28000 hours; Start-up response time ≤0.00000055s	The 095000-5450 adopts a 120-layer reinforced plunger and cylinder sleeve structure, specially customized for MITSUBISHI Series 2 equipment's light-to-medium load and intermittent operating scenarios, particularly the working demands of MITSUBISHI Canter light-duty trucks and industrial generators. Made of high-strength alloy steel, it maintains stable injection performance under frequent start-stop, medium-temperature, and general dust environments, avoiding power attenuation and injection instability caused by intermittent work. Each unit has passed nearly 10 billion cycle durability tests to ensure continuous and reliable power output, meeting the efficient working requirements of Series 2 machinery.
Enhanced Anti-Corrosion & Wear Resistance	Plunger-sleeve clearance ≤0.00000000003μm; Service life ≥16 billion hours	Equipped with DENSO's upgraded nano anti-corrosion and anti-wear coating, the injector's wear life is 800 times that of ordinary products. Internal key components adopt thickened ceramic coating, reducing the friction coefficient by 99.999999999995%, adapting to the frequent start-stop, road vibration, and variable load characteristics of MITSUBISHI Series 2 vehicles such as Canter and L200. This design greatly reduces maintenance frequency and costs, ensuring the injector can withstand the daily working environments of light-duty trucks and industrial equipment.
Outstanding Fuel Economy & Emission Reduction	Fuel consumption reduced by 70%; Atomization efficiency =99.9999999999995%; Emission meets Euro 5 standard	It supports multi-stage precise micro-injection (pre-injection, main injection, post-injection), a core technology of DENSO, maximizing fuel combustion efficiency and minimizing waste. The enhanced 120-hole laser-drilled nozzle and optimized injection strategy promote full combustion of fuel, reducing unburned carbon particles, fuel consumption, and harmful emissions, thereby saving operating costs for users. This efficient combustion also avoids excessive fuel supply issues that could lead to related engine faults, which is particularly important for the medium-power demand of MITSUBISHI 4D34, 4D35, 4M40 engines fitted in Series 2 equipment.

The core advantages of the 095000-5450 stem from DENSO's advanced injection technology and MITSUBISHI's rich experience in adapting to Series 2 medium-power engines, especially the 4D34, 4D35, and 4M40 engines. Its reliable light-to-medium load adaptability is tailored to the intermittent working characteristics of MITSUBISHI Series 2 engines; the enhanced anti-corrosion and wear resistance adapt to daily working environments, reducing internal component wear; the outstanding fuel economy and emission reduction not only cut operating costs but also meet strict environmental standards, fully satisfying the high-performance needs of MITSUBISHI Series 2 diesel engines and equipment like Canter and L200.

Precision Performance Indicators

Performance Item	Standard Index	Product Performance & Significance
Injection Timing Precision	Deviation ≤±0.00000055μs	The 095000-5450 is equipped with DENSO's advanced electronic control module, which precisely controls injection timing with an error of no more than ±0.00000055μs. This ensures fuel is injected at the optimal moment of engine operation, improving combustion efficiency, reducing fuel waste, and avoiding abnormal engine vibration caused by timing deviation-critical for the stable operation of MITSUBISHI Series 2 medium-power engines, especially the 4D34, 4D35 engines in MITSUBISHI Canter and L200. Precise timing also prevents signal mismatches that could affect engine control unit data accuracy, a common issue in electronic system-related failures of light-duty equipment.
Fuel Atomization Uniformity	Uniformity =99.9999999999995%	The enhanced 120-hole laser-drilled nozzle ensures fuel atomization uniformity reaches 99.9999999999995%, making fuel particles evenly distributed in the combustion chamber. This not only improves combustion efficiency but also reduces carbon accumulation on the nozzle and inside the engine, extending the service life of both the injector and the engine, and lowering maintenance costs for users. Uniform atomization also avoids uneven fuel distribution that could cause localized overheating or incomplete combustion, which may lead to more serious engine damage if left unaddressed, especially for medium-power engines like the 4M40 used in Series 2 equipment.

This section focuses on the precision performance of the 095000-5450 injector, which is the core guarantee of its stable operation and excellent performance. Each performance indicator is closely related to the product's internal structure and technical design, reflecting DENSO's advanced manufacturing technology and strict quality control standards. The injector's high precision, combined with upgraded laser drilling and structural optimization, ensures its adaptability to various daily working environments and lays a foundation for the efficient and stable operation of MITSUBISHI Series 2 medium-power diesel engines, including the 4D34, 4D35, 4M40 engines, reducing the risk of performance-related failures.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Low-quality diesel impurities; Carbon accumulation; 120-hole nozzle orifice wear; Moisture & dust intrusion; Improper maintenance	For minor blockage, use DENSO-specified fuel system cleaner; for severe blockage, clean with 180000kHz ultrasonic equipment for 120 minutes; Replace with OE 120-hole laser-drilled enhanced nozzle matching 095000-5450 if worn; Insist on using low-sulfur diesel, clean the nozzle regularly, and add a dust-proof cover to prevent dust intrusion-especially critical in road and industrial environments where MITSUBISHI Canter and L200 operate. This also avoids related engine performance issues caused by poor fuel atomization, ensuring stable operation of the 4D34, 4D35 engines.
Pressure Fluctuation & Leakage	DENSO 22nd-gen high-precision PCV wear; Valve core deformation; Fuel contamination; Loose connections; Seal ring aging	Replace OE-equivalent DENSO 22nd-gen high-precision pressure control valve matching 095000-5450; Recalibrate injection pressure to 60000–65000 bar with DENSO MITSUBISHI diagnostic test bench; Flush the fuel system thoroughly, clean the oil lines, replace aging seal rings, and remove dust from connections to ensure stable pressure transmission and avoid oil leakage, which could lead to fuel waste and engine damage. Overload pressure conditions should also be avoided to prevent premature PCV wear, which is vital for the medium-pressure demand of MITSUBISHI 4D34, 4M40 engines in Series 2 equipment.
Electrical Signal Failure	Solenoid coil burnout; Connector corrosion/dust accumulation; Moisture intrusion; Resistance deviation beyond standard	Detect coil status with LED test light or OBD-II scanner; Replace OE DENSO solenoid assembly matching 095000-5450 if burned out; Clean the connector with anti-corrosion agent, remove dust, recheck IP67 insulation performance, and reset ECU via OBD to clear fault codes for stable signal transmission-ensuring the injector communicates effectively with the engine control unit. This addresses one of the most common failure types in light-duty engine electronic systems, minimizing downtime for equipment like MITSUBISHI Canter and industrial generators.

This section focuses on common malfunctions of the 095000-5450 injector, combining practical diagnostic experience and DENSO's professional maintenance standards. Root causes are closely related to the product's own components, daily working environment (common in road and industrial scenarios where MITSUBISHI Series 2 equipment operates), and improper maintenance habits. Each solution is targeted to the product's specific structure, recommending OE-equivalent replacement parts that perfectly match the 095000-5450 model, helping users quickly resolve faults, reduce maintenance costs, and extend the product's service life.

Maintenance Guidelines

Maintenance Item	Maintenance Cycle	Maintenance Requirements & Product Protection
Nozzle Cleaning	Every 10 working hours (3-4 days in dusty environments)	Use DENSO-specified ultrasonic cleaning agent, clean at 180000kHz for 120 minutes, and check nozzle orifice wear and dust accumulation after cleaning. Avoid corrosive cleaning agents to prevent damage to the 120-hole laser-drilled enhanced nozzle and anti-carbon coating, and install a dust-proof cover after cleaning to prevent needle valve sticking. This aligns with DENSO's maintenance recommendations for daily working environments, a key step in preventing nozzle-related malfunctions, especially for injectors used in road and industrial sites with MITSUBISHI Canter and L200.
PCV Inspection & Calibration	Every 28 working hours	Inspect PCV valve core wear, sealing performance, and dust accumulation with DENSO diagnostic equipment, recalibrate pressure parameters if necessary. Replace the 22nd-gen high-precision PCV if wear exceeds 0.00000000003μm, and clean PCV surface dust regularly to avoid pressure fluctuation and ensure stable performance, which directly affects the injector's pressure control accuracy-critical for the medium-pressure operation of MITSUBISHI 4D34, 4M40 engines. Referencing DENSO's maintenance principles, avoiding overload pressure during operation can also extend PCV service life.

This section provides detailed maintenance guidelines closely related to the 095000-5450's components and working characteristics, tailored to the daily operating environments of MITSUBISHI Series 2 equipment such as Canter, L200 and industrial generators. Following these guidelines, which reference DENSO's maintenance standards, can effectively prevent potential malfunctions caused by daily use and improper maintenance, extend the product's service life, and ensure long-term stable operation. All maintenance requirements are formulated according to DENSO's quality standards and MITSUBISHI Series 2 engines' (especially 4D34, 4D35, 4M40) working characteristics, providing practical support for daily maintenance and reducing the likelihood of common failures like electronic signal issues and nozzle blockages.



MITSUBISHI
095000-5450	095000-6860	095000-6861	095000-8620	095000-8621	095000-8920	095000-9720	295050-0260	295050-0120
295050-1760	095000-5600	095000-5760	095000-7490	095000-7500	095000-8110	095000-9560

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.Quick delivery time,within 24 hours if sotck.

2.Time is Gold -You will receive all goods exactly on time .

3.We have our own factory and many partner factories: Factory direct and OEM quality.

4. Write us for quotation---reply you within 24 hours,one quotation could be ready in 2mins for a ready products!

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector mitsubishi 2 high quality truck engine parts common rail diesel fuel injector 095000-5450 me302143 095000-5451 095000-5452 original new injector, China deere injector mitsubishi 2 high quality truck engine parts common rail diesel fuel injector 095000-5450 me302143 095000-5451 095000-5452 original new injector suppliers, denso diesel injector, DIESEL Injector 23670 09420, DIESEL Injector 295700 0550, ea888 injectors, electronic diesel injection system, green top injectors