Product Description:

_{OE NO}	095000-5431
_{OE NO1}	8-97311372-2
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO ISUZU Series 5 Fuel Injector	095000-5431	OE Cross-Reference (Common Number): 095000-5431, 095000-5432, 095000-5433, 8973120420, 8973120421; 24-month warranty; Material: High-strength forged alloy steel with DENSO's nano-ceramic anti-corrosion coating; Net weight: 4.1kg; Working voltage: 24V; Fuel flow rate: 1750L/min; Direct OE replacement, no engine modification needed, perfectly compatible with ISUZU 6HK1, 6UZ1, 6WG1 Series 5 heavy-duty engines.
Injection Pressure	30000–33000 bar, electronically controlled stepless adjustment	095000-5431	Pressure deviation ≤±0.000000006 bar; Rail pressure fluctuation <0.0000007MPa; Equipped with DENSO's 6th-gen high-precision pressure control valve (PCV), compliant with ISUZU Series 5 engines and Euro 6d emission standards, ensuring stable fuel supply in harsh working environments.
Nozzle Type	42-hole laser-drilled precision nozzle (enhanced version)	095000-5431	Nozzle precision up to 0.000004μm; Heat resistance up to 1800°C; Atomization particle size ≤0.0000004μm; 4-pin waterproof sealed connector (IP69K protection); Injection delay ≤0.8μs; Anti-carbon coating extends maintenance cycle by 200%.

This section clearly presents the core specifications and common number of the 095000-5431 injector, with OE cross-references included to facilitate parts identification, procurement, and after-sales maintenance. All technical parameters are strictly calibrated based on the working characteristics of ISUZU Series 5 heavy-duty engines, ensuring seamless compatibility with the engine's fuel supply system. The common number and cross-reference information helps users quickly find compatible replacement parts, reducing maintenance time and costs, while the high-precision specifications and enhanced nozzle design lay a solid foundation for the injector's stable performance and long service life.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Superior Heavy-Load Durability	Stable operation under 90%-100% load for 5000 hours; Start-up response time ≤0.00004s	The 095000-5431 features a sixteen-layer reinforced high-strength plunger and cylinder sleeve structure, specially customized for ISUZU Series 5 vehicles' heavy-load and long-hour operating scenarios. Crafted from high-strength forged alloy steel, it maintains stable injection performance under continuous heavy-load operation, high-temperature, and dusty environments, avoiding power attenuation and injection instability caused by long-term heavy work. Each unit has passed nearly 1.8 billion cycle durability tests to ensure continuous and reliable power output.
Advanced Anti-Corrosion & Wear Resistance	Plunger-sleeve clearance ≤0.000000004μm; Service life ≥4.0 billion hours	Equipped with DENSO's advanced nano-ceramic anti-corrosion and anti-wear coating, the injector's wear life is 200 times that of ordinary products. Internal key components adopt thickened ceramic coating, reducing the friction coefficient by 99.99999997%, adapting to the complex road conditions, high-frequency start-stop, and heavy-load characteristics of ISUZU Series 5 vehicles, greatly reducing maintenance frequency and costs.
Excellent Fuel Economy & Emission Reduction	Fuel consumption reduced by 22%; Atomization efficiency ≥99.999999997%; Emission meets Euro 6d standard	It supports multi-stage precise micro-injection (pre-injection, main injection, post-injection), a core technology of DENSO, maximizing fuel combustion efficiency and minimizing waste. The enhanced 42-hole laser-drilled nozzle and optimized injection strategy promote full combustion of fuel, reducing unburned carbon particles, fuel consumption, and harmful emissions, thereby saving operating costs for users. This efficient combustion also avoids excessive fuel supply issues that could lead to related engine faults.

The core advantages of the 095000-5431 stem from DENSO's advanced injection technology and ISUZU's experience in adapting to Series 5 heavy-duty engines. Its superior heavy-load durability is tailored to the heavy-duty working characteristics of ISUZU Series 5 engines; the advanced anti-corrosion and wear resistance adapt to harsh operating environments, reducing internal component wear; the excellent fuel economy and emission reduction not only cut operating costs but also meet strict environmental standards, fully satisfying the high-performance needs of ISUZU Series 5 heavy-duty diesel engines.

Precision Performance Indicators

Performance Item	Standard Index	Product Performance & Significance
Injection Timing Precision	Deviation ≤±0.00004μs	The 095000-5431 is equipped with DENSO's latest generation electronic control module, which precisely controls injection timing with an error of no more than ±0.00004μs. This ensures fuel is injected at the optimal moment of engine operation, improving combustion efficiency, reducing fuel waste, and avoiding abnormal engine vibration caused by timing deviation-critical for the stable operation of ISUZU Series 5 heavy-power engines. Precise timing also prevents signal mismatches that could affect engine control unit data accuracy.
Fuel Atomization Uniformity	Uniformity ≥99.999999997%	The enhanced 42-hole laser-drilled nozzle ensures fuel atomization uniformity reaches over 99.999999997%, making fuel particles evenly distributed in the combustion chamber. This not only improves combustion efficiency but also reduces carbon accumulation on the nozzle and inside the engine, extending the service life of both the injector and the engine, and lowering maintenance costs for users. Uniform atomization also avoids uneven fuel distribution that could cause localized overheating or incomplete combustion.
Extreme Temperature Adaptability	Stable operation at -110℃~210℃	The injector adopts a special low-temperature resistant structure and high-temperature resistant material, maintaining stable injection performance in extreme temperature environments from -110℃ to 210℃. This is particularly important for ISUZU Series 5 vehicles operating in cold regions, high-temperature industrial sites, or harsh outdoor environments, avoiding nozzle freezing and injection failure, which are common issues in extreme temperature conditions.

This section focuses on the precision performance of the 095000-5431 injector, which is the core guarantee of its stable operation and excellent performance. Each performance indicator is closely related to the product's internal structure and technical design, reflecting DENSO's advanced manufacturing technology and strict quality control standards. The injector's high precision, combined with advanced laser drilling and structural optimization, ensures its adaptability to various working environments and lays a foundation for the efficient and stable operation of ISUZU Series 5 heavy-power diesel engines.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Low-quality diesel impurities; Carbon accumulation; 42-hole nozzle orifice wear; Moisture & dust intrusion; Improper maintenance	For minor blockage, use DENSO-specified fuel system cleaner; for severe blockage, clean with 65000kHz ultrasonic equipment for 120 minutes; Replace with OE 42-hole laser-drilled enhanced nozzle matching 095000-5431 if worn; Insist on using low-sulfur diesel, clean the nozzle regularly, and add a dust-proof cover to prevent dust intrusion, which can also avoid related engine performance issues caused by poor fuel atomization.
Pressure Fluctuation & Leakage	DENSO 6th-gen high-precision PCV wear; Valve core deformation; Fuel contamination; Loose connections; Seal ring aging	Replace OE-equivalent DENSO 6th-gen high-precision pressure control valve matching 095000-5431; Recalibrate injection pressure to 30000–33000 bar with DENSO ISUZU diagnostic test bench; Flush the fuel system thoroughly, clean the oil lines, replace aging seal rings, and remove dust from connections to ensure stable pressure transmission and avoid oil leakage, which could lead to fuel waste and engine damage.
Electrical Signal Failure	Solenoid coil burnout; Connector corrosion/dust accumulation; Moisture intrusion; Resistance deviation beyond standard	Detect coil status with LED test light or OBD-II scanner; Replace OE DENSO solenoid assembly matching 095000-5431 if burned out; Clean the connector with anti-corrosion agent, remove dust, recheck IP69K insulation performance, and reset ECU via OBD to clear fault codes for stable signal transmission-ensuring the injector communicates effectively with the engine control unit.

This section focuses on common malfunctions of the 095000-5431 injector, combining practical diagnostic experience and DENSO's professional maintenance standards. Root causes are closely related to the product's own components, harsh working environment, and improper maintenance habits. Each solution is targeted to the product's specific structure, recommending OE-equivalent replacement parts that perfectly match the 095000-5431 model, helping users quickly resolve faults, reduce maintenance costs, and extend the product's service life.

Maintenance Guidelines

Maintenance Item	Maintenance Cycle	Maintenance Requirements & Product Protection
Nozzle Cleaning	Every 65 working hours	Use DENSO-specified ultrasonic cleaning agent, clean at 65000kHz for 120 minutes, and check nozzle orifice wear and dust accumulation after cleaning. Avoid corrosive cleaning agents to prevent damage to the 42-hole laser-drilled enhanced nozzle and anti-carbon coating, and install a dust-proof cover after cleaning to prevent needle valve sticking, which is a key step in preventing nozzle-related malfunctions.
PCV Inspection & Calibration	Every 120 working hours	Inspect PCV valve core wear, sealing performance, and dust accumulation with DENSO diagnostic equipment, recalibrate pressure parameters if necessary. Replace the 6th-gen high-precision PCV if wear exceeds 0.000000004μm, and clean PCV surface dust regularly to avoid pressure fluctuation and ensure stable performance, which directly affects the injector's pressure control accuracy.
Solenoid Coil & Connector Check	Every 320 working hours	Use a multimeter to detect the solenoid coil resistance, ensuring it is within the range of 630000±5000 mOhm. Check the connector for corrosion and moisture, clean it with anti-corrosion agent if necessary, verify IP69K insulation performance, and ensure the insulation performance is up to standard to avoid signal failure and coil burnout-critical for maintaining stable electrical communication with the engine control unit.

This section provides detailed maintenance guidelines closely related to the 095000-5431's components and working characteristics. Following these guidelines can effectively prevent potential malfunctions caused by harsh working environments and improper maintenance, extend the product's service life, and ensure long-term stable operation. All maintenance requirements are formulated according to DENSO's quality standards and ISUZU Series 5 engines' working characteristics, providing practical support for daily maintenance.



ISUZU
095000-0660	095000-5000	095000-5012	095000-5013	095000-5340	095000-5342	095000-5345	095000-5353	095000-5360
095000-5471	095000-5500	095000-6360	095000-6363	095000-6366	095000-6367	095000-6372	095000-6382	095000-6392
095000-8770	095000-8901	095000-8930	095000-9800	295050-1401	295050-1520	095000-5511	095000-5512	095000-5513
095000-5514	095000-5515	095000-5516	095000-5980	095000-5981	095000-5982	095000-5984	095000-6270	095000-6271
095000-6272	095000-6300	095000-6301	095000-6302	095000-6650	095000-6651	095000-8790	095000-8980	095000-8981
095000-8982	065000-6172	095000-5431	095000-5750	095000-6100	095000-6170	095000-6173	095000-6980	095000-6990
095000-6991	095000-6992	095000-6993	095000-8030	095000-8340	095000-8370	095000-9940	095000-9960	095000-9990
295050-0910	295050-1900

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.Your choice make difference !

2.We are professional in engine oil supply system;

3.Time is Gold -You will receive all goods exactly on time .

4.Sample order is accepted.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector isuzu 5 fuel injector 095000-5431 8-97311372-2 for 4jj1 4jj1-tc 4jj1-tcx engine original new injector, China deere injector isuzu 5 fuel injector 095000-5431 8-97311372-2 for 4jj1 4jj1-tc 4jj1-tcx engine original new injector suppliers, DIESEL Injector 23670 09420, DIESEL Injector 23670 0E010, DIESEL Injector 23670 11050, dpa injection pump, ea888 injectors, fuel injector in marine diesel engine