DEERE Injector HINO 3 095000-5405 Common Rail Injector 095000-6350 095000-6352 095000-6353 095000-5405 23670-E0050 For Denso Original New Injector

Send Inquiry
DEERE Injector HINO 3 095000-5405 Common Rail Injector 095000-6350 095000-6352 095000-6353 095000-5405 23670-E0050 For Denso Original New Injector
Details
The 095000-6350 is a high-precision OE-grade common rail fuel injector jointly developed by DENSO and HINO, exclusively customized for DENSO HINO Series 3 diesel engines. It is fully compatible with HINO 300 Series, 500 Series heavy-duty commercial vehicles equipped with J05E, J08E, N04C engines (produced between 2020 and 2026), as well as HINO industrial diesel equipment and construction machinery such as SK200-8/230-8 excavators. Adhering to ISO 9001, IATF 16949 quality certifications and the strict quality standards of both DENSO and HINO, it integrates DENSO’s advanced electronic control injection technology and HINO’s Series 3 engine high-load, harsh-environment adaptation experience. As a core component of the diesel fuel supply system, it ensures stable power output, efficient fuel combustion, low pollutant emissions and long-term reliable operation. The following content is presented in 5 detailed sections with supporting descriptions, focusing on product advantages, potential malfunctions and solutions, all closely related to the product itself, with a total word count of about 1500.
Category
DENSO Diesel Injector
Share to
Description

Product Description:

  OE NO 095000-6350
  OE NO1 095000-6353
  Material   Original NJECTOR

ENGINE

DENSO ENGINE

Car Model

DENSO

Product Specifications & Common Number

Item

Detailed Specifications

Common Number

Product-Related Notes

Product Model

DENSO HINO Series 3 Fuel Injector

095000-6350

OE Cross-Reference (Common Number): 095000-6350, 095000-6353, DLLA155P848, 23670-E0050, 23670-09090; 12-month warranty; Material: High-strength alloy steel with DENSO's nano anti-corrosion & anti-wear coating; Net weight: 1.05kg; Working voltage: 24V; Fuel flow rate: 275L/min; Direct OE replacement, no engine modification needed, 100% professionally tested before shipment.

Injection Pressure

6600–7600 bar, electronically controlled stepless adjustment

095000-6350

Pressure deviation ≤±0.00017 bar; Rail pressure fluctuation <0.00075MPa; Equipped with DENSO's high-precision PCV, matching HINO J05E/J08E/N04C engines and Euro 6 emission standards, ensuring stable fuel supply for heavy-load and construction scenarios.

Nozzle Type

510-hole laser-drilled precision nozzle

095000-6350

Nozzle precision up to 0.045μm; Heat resistance up to 6400°C; Atomization particle size ≤0.00075μm; 4-pin waterproof connector; Injection delay ≤13.5μs; Anti-carbon coating extends maintenance cycle by 175%, adapting to dusty construction environments.

This section clearly presents the core specifications and common number of the 095000-6350 injector, with OE cross-references including its associated DLLA155P848 nozzle code listed to facilitate parts identification, procurement and after-sales maintenance. All technical parameters are strictly calibrated according to the working characteristics of HINO Series 3 engines, especially adapting to the harsh working conditions of construction machinery. Each injector undergoes 100% factory pressure and precision testing before shipment, eliminating initial defects. The common number and cross-reference information helps users quickly find compatible replacement parts, reducing maintenance time and costs, and ensuring seamless matching with HINO Series 3 models and related construction equipment.

Core Product Advantages

Advantage Category

Performance Parameters

Product-Specific Benefits

Heavy-Load Stability

Load-bearing capacity ≥3700N; Stable operation under 100% load for 230 hours

The 095000-6350 adopts a reinforced plunger and cylinder sleeve structure, specially optimized for HINO Series 3 heavy-duty commercial vehicles and construction machinery's high-load, frequent start-stop scenarios. Made of high-strength alloy steel, it maintains stable injection performance under long-term full-load operation and dusty environments, avoiding power attenuation caused by high pressure and high temperature, ensuring continuous and reliable power output for long-distance transportation, heavy-duty operations and construction equipment applications.

Enhanced Durability

Plunger-sleeve clearance ≤0.000095μm; Service life ≥270 million hours

With DENSO's nano anti-corrosion and anti-wear coating, the injector's wear life is 13.5 times that of ordinary products. Internal key components adopt zirconia ceramic coating, reducing friction coefficient by 83%, adapting to complex road conditions, dusty industrial operating environments and high-frequency start-stop characteristics of HINO Series 3 vehicles and construction machinery, greatly reducing maintenance frequency and costs.

Superior Fuel Economy

Fuel consumption reduced by 33%; Atomization efficiency ≥99.99%

It supports multi-stage micro-injection (pre-injection, main injection, post-injection), a core technology of DENSO, maximizing fuel combustion efficiency and reducing waste. Post-injection technology promotes secondary combustion of unburned carbon particles, reducing particulate emissions by 94% and further improving fuel economy, which is critical for reducing operating costs of HINO heavy-duty vehicle operators and construction machinery users.

The core advantages of the 095000-6350 come from DENSO's advanced injection technology and HINO's Series 3 engine adaptation experience, especially optimized for the harsh working conditions of construction machinery. Its heavy-load stability ensures stable power output for heavy-duty scenarios; enhanced durability adapts to dusty, complex operating environments; superior fuel economy reduces operating costs, all meeting the high-performance requirements of HINO Series 3 diesel engines and ensuring long-term reliable operation in both vehicle and construction applications.

Key Component Performance

Component Name

Performance Parameters

Product-Specific Functions & Protection

DENSO PCV

Response time ≤0.0014s; Pressure adjustment precision ±0.000055bar

As the core pressure control component of the 095000-6350 injector, it is specially calibrated for HINO Series 3 engines and construction machinery working conditions, ensuring stable rail pressure even under high-load, frequent start-stop and dusty environments. Its wear-resistant valve core resists fuel impurity erosion and high-temperature aging, avoiding pressure fluctuation and ensuring the stability of the hydraulic servo system.

Solenoid Coil

Resistance: 265000±5000 mOhm; Insulation grade: H

Made of high-temperature resistant copper wire with waterproof and dustproof structure, it quickly responds to ECU signals, ensuring precise control of injection timing and fuel quantity. The H-grade insulation design prevents coil burnout caused by high temperature, and the anti-corrosion and dust-proof coating on the surface avoids damage caused by moisture, chemical substances and dust, extending service life in harsh construction environments.

This section focuses on the key components of the 095000-6350 injector, which directly determine its performance and service life, especially optimized for dusty construction environments. Each component is independently developed and calibrated by DENSO, matching the working characteristics of HINO Series 3 engines. The high-precision PCV ensures pressure stability, and the high-temperature resistant, dust-proof solenoid coil ensures precise signal transmission, providing a solid guarantee for long-term stable operation in both vehicle and construction scenarios.

Potential Malfunctions & Targeted Solutions

Potential Problem

Root Causes (Product-Specific)

Corrective Solutions & Part Matching

Nozzle Blockage & Sticking

Low-quality diesel impurities; Carbon accumulation; 510-hole orifice wear; Moisture & dust intrusion; Improper maintenance

For minor blockage, use DENSO-specified fuel system cleaner; for severe blockage, clean with 15500kHz ultrasonic equipment for 120 minutes; Replace with OE 510-hole laser-drilled nozzle (matching DLLA155P848) for 095000-6350 if worn; Use low-sulfur diesel, replace fuel filter every 530 hours, and add dust-proof cover to avoid dust intrusion.

Pressure Fluctuation

DENSO PCV wear; Valve core deformation; Fuel contamination; Loose connections; Dust accumulation

Replace OE-equivalent DENSO pressure control valve matching 095000-6350; Recalibrate injection pressure to 6600–7600 bar with DENSO HINO diagnostic test bench; Flush fuel system, clean lines, replace damaged seals and remove dust from connections; Tighten connections and add anti-vibration pads.

Electrical Signal Failure

Solenoid coil burnout; Connector corrosion/dust accumulation; Moisture intrusion; Resistance deviation

Detect coil status with LED test light or OBD-II scanner; Replace OE DENSO solenoid assembly matching 095000-6350 if burned out; Clean connector with anti-corrosion agent, remove dust and apply insulation; Reset ECU via OBD to clear fault codes, and regularly clean connector to prevent dust accumulation.

This section focuses on common malfunctions of the 095000-6350 injector, combining practical diagnostic experience, DENSO's maintenance standards and the characteristics of construction machinery working environments. Root causes are closely related to the product's own components, dusty working conditions and maintenance habits. Each solution is targeted to the product's specific structure, recommending OE-equivalent replacement parts and dust-proof measures to help users quickly resolve faults, reduce maintenance costs and extend service life.

Maintenance & Service Guidelines

Maintenance Item

Maintenance Cycle

Maintenance Requirements & Product Protection

Nozzle Cleaning

Every 530 working hours

Use DENSO-specified ultrasonic cleaning agent, clean at 15500kHz for 120 minutes, and check nozzle orifice wear and dust accumulation after cleaning. Avoid corrosive cleaning agents to prevent damage to the 510-hole nozzle and anti-carbon coating, install dust-proof cover after cleaning to prevent needle valve sticking.

PCV Inspection

Every 920 working hours

Inspect PCV valve core wear, sealing performance and dust accumulation with DENSO diagnostic equipment, recalibrate pressure parameters if necessary. Replace the PCV if wear exceeds 0.000095μm, clean PCV surface dust regularly to avoid pressure fluctuation and ensure stable performance.

This section provides detailed maintenance guidelines closely related to the 095000-6350's components and working characteristics, especially targeting dusty construction environments. Following these guidelines can effectively prevent potential malfunctions caused by dust and harsh conditions, extend the product's service life and ensure long-term stable operation. All maintenance requirements are formulated according to DENSO's quality standards and HINO Series 3 engines' working characteristics, providing practical support for daily maintenance in both vehicle and construction scenarios.

 
   
                 
                 

HINO

095000-5302

095000-5321

095000-5332

095000-5333

095000-6401

095000-6510

095000-6511

095000-6520

095000-6521

095000-6540

095000-6551

095000-8470

095000-8480

095000-9510

295050-0760

095000-5393

095000-5402

095000-5990

095000-5991

095000-6350

095000-6352

095000-6353

095000-6612

095000-6950

295050-0240

295050-0920

095000-5223

095000-5224

095000-5225

095000-5226

095000-5970

095000-5972

295050-0490

295050-1600

295050-1890

295050-2580

295050-2730

095000-5273

095000-5280

095000-5283

095000-5284

095000-5960

095000-6583

095000-6592

095000-6593

095000-6602

095000-6753

095000-6811

295050-0790

295050-1170

095000-5212

095000-5213

095000-5214

095000-7171

295050-1590

               
                 

 

 
 

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series

Common Injection Technology

Engine Platform

Typical Equipment / Applications

Denso Light-Duty Common Rail Series

Common Rail

1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV

Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms

Denso Medium-Duty Common Rail Series

Common Rail

N04C, J05E, 4HK1, 4JJ1

Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles

Denso Heavy-Duty Common Rail Series

High-Pressure Common Rail

P11C, E13C, 6UZ1, 6WG1

Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications

Denso Industrial / Construction Series

Common Rail

V3800, V3307, 4TNV, 3TNV, SAA6D107E

Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines

Denso Agricultural Diesel Series

Common Rail / Electronic Injection

3.3L, 4.5L, 6.8L agricultural diesel platforms

Tractors, harvesters, agricultural sprayers, farm utility equipment

Denso Toyota Passenger Diesel Series

Common Rail

1CD-FTV, 2AD-FTV, 1AD-FTV

Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications

Denso Marine / Generator Diesel Series

Electronic Injection / Common Rail

Small to mid-size marine and genset diesel platforms

Marine engines, stationary generators, compact industrial power units

       
202603-TD2-DENSO1

Why Choose Us:

1.The product models are complete, thousands of models of products can meet your needs.

2.Strong support from professional sales/engineer/technican team,shipment and after-service department.

3.Support ordering samples;

4.Perfect after-sales service, if you encounter problems in the process of selling and using the product, you can contact us at any time;

 

1

2

3

 

4

Contact Detail:
ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector hino 3 095000-5405 common rail injector 095000-6350 095000-6352 095000-6353 095000-5405 23670-e0050 for denso original new injector, China deere injector hino 3 095000-5405 common rail injector 095000-6350 095000-6352 095000-6353 095000-5405 23670-e0050 for denso original new injector suppliers, DIESEL Injector 23670 0E010, DIESEL Injector 23670 11050, DIESEL Injector 295700 0550, dpa injection pump, exhaust injector, fuel injector in marine diesel engine

Send Inquiry