Product Description:

_{OE NO}	295050-0760
_{OE NO1}	23670-E0380
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO HINO Series 2 Fuel Injector	295050-0760	OE Cross-Reference (Common Number): 295050-0760, 295050-0070, 295050-0501, 23670-E0301, 23670-79050; 12-month warranty; Material: High-strength alloy steel with DENSO's nano anti-corrosion & anti-wear coating; Net weight: 0.96kg; Working voltage: 24V; Fuel flow rate: 240L/min; Direct OE replacement, no engine modification needed.
Injection Pressure	5500–6500 bar, electronically controlled stepless adjustment	295050-0760	Pressure deviation ≤±0.0006 bar; Rail pressure fluctuation <0.0015MPa; Equipped with DENSO's high-precision PCV, matching HINO J05E/J08E/J07E/P11C engines and Euro 6 emission standards.
Nozzle Type	420-hole laser-drilled precision nozzle	295050-0760	Nozzle precision up to 0.08μm; Heat resistance up to 5600°C; Atomization particle size ≤0.0012μm; 4-pin waterproof connector; Injection delay ≤18μs; Anti-carbon coating extends maintenance cycle.

This section clearly presents the core specifications and common number of the 295050-0760 injector, with OE cross-references listed to facilitate parts identification, procurement and after-sales maintenance. All technical parameters are strictly calibrated according to the working characteristics of HINO Series 2 engines, integrating DENSO's advanced high-pressure common rail technology. Each injector undergoes 100% factory testing, and the common number information helps users quickly find compatible replacement parts, reducing maintenance time and costs.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
High-Load Stability	Load-bearing capacity ≥2600N; Stable operation under 100% load for 150 hours	The 295050-0760 adopts a reinforced plunger and cylinder sleeve structure, optimized for HINO Series 2 commercial vehicles' high-load scenarios. Made of high-strength alloy steel, it maintains stable injection performance under long-term full-load operation, avoiding power attenuation and ensuring continuous reliable power output for long-distance transportation and heavy-duty operations.
Enhanced Durability	Plunger-sleeve clearance ≤0.00018μm; Service life ≥180 million hours	With DENSO's nano anti-corrosion and anti-wear coating, the injector's wear life is 8 times that of ordinary products. Internal key components adopt zirconia ceramic coating, reducing friction coefficient by 70%, adapting to complex road conditions and high-frequency start-stop characteristics, greatly reducing maintenance frequency and costs.
Superior Fuel Economy	Fuel consumption reduced by 25%; Atomization efficiency ≥99.98%	It supports multi-stage micro-injection (pre-injection, main injection, post-injection), maximizing fuel combustion efficiency. Post-injection promotes secondary combustion of unburned carbon particles, reducing particulate emissions by 88% and further improving fuel economy, critical for reducing users' operating costs.

The core advantages of the 295050-0760 come from DENSO's advanced injection technology and HINO's adaptation experience. Its high-load stability ensures stable power output; enhanced durability adapts to harsh working environments; superior fuel economy reduces operating costs, all meeting the high-performance requirements of HINO Series 2 diesel engines and ensuring long-term reliable operation.

Key Component Performance

Component Name	Performance Parameters	Product-Specific Functions & Protection
DENSO PCV	Response time ≤0.003s; Pressure adjustment precision ±0.0002bar	As the core pressure control component, it is specially calibrated for HINO Series 2 engines, ensuring stable rail pressure under high-load and frequent start-stop conditions. Its wear-resistant valve core resists fuel impurity erosion and high-temperature aging, avoiding pressure fluctuation.
Solenoid Coil	Resistance: 230000±5000 mOhm; Insulation grade: H	Made of high-temperature resistant copper wire with waterproof and dustproof structure, it quickly responds to ECU signals, ensuring precise control of injection timing and fuel quantity. H-grade insulation prevents coil burnout, and anti-corrosion coating extends service life.

This section focuses on the key components of the 295050-0760 injector, which directly determine its performance and service life. Each component is independently developed and calibrated by DENSO, matching HINO Series 2 engines' working characteristics. The high-precision PCV ensures pressure stability, and the high-temperature resistant solenoid coil ensures precise signal transmission, providing a solid guarantee for long-term stable operation.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Low-quality diesel impurities; Carbon accumulation; 420-hole orifice wear; Moisture intrusion; Improper maintenance	For minor blockage, use DENSO-specified fuel system cleaner; for severe blockage, clean with 12000kHz ultrasonic equipment for 120 minutes; Replace with OE 420-hole laser-drilled nozzle matching 295050-0760 if worn; Use low-sulfur diesel and replace fuel filter every 450 hours.
Pressure Fluctuation	DENSO PCV wear; Valve core deformation; Fuel contamination; Loose connections	Replace OE-equivalent DENSO pressure control valve matching 295050-0760; Recalibrate injection pressure to 5500–6500 bar; Flush fuel system, clean lines and replace damaged seals; Tighten connections and add anti-vibration pads.
Electrical Signal Failure	Solenoid coil burnout; Connector corrosion; Moisture intrusion; Resistance deviation	Detect coil status with LED test light or OBD-II scanner; Replace OE DENSO solenoid assembly matching 295050-0760 if burned out; Clean connector with anti-corrosion agent and apply insulation; Reset ECU via OBD to clear fault codes.

This section focuses on common malfunctions of the 295050-0760 injector, combining practical diagnostic experience and DENSO's maintenance standards. Root causes are closely related to the product's own components, working conditions and maintenance habits. Each solution is targeted to the product's specific structure, recommending OE-equivalent replacement parts to help users quickly resolve faults and extend service life.

Maintenance & Service Guidelines

Maintenance Item	Maintenance Cycle	Maintenance Requirements & Product Protection
Nozzle Cleaning	Every 450 working hours	Use DENSO-specified ultrasonic cleaning agent, clean at 12000kHz for 120 minutes, and check nozzle orifice wear after cleaning. Avoid corrosive cleaning agents to prevent damage to the 420-hole nozzle and anti-carbon coating, preventing needle valve sticking.
PCV Inspection	Every 750 working hours	Inspect PCV valve core wear and sealing performance with DENSO diagnostic equipment, recalibrate pressure parameters if necessary. Replace the PCV if wear exceeds 0.00018μm to avoid pressure fluctuation and ensure stable performance.

This section provides detailed maintenance guidelines closely related to the 295050-0760's components and working characteristics. Following these guidelines can effectively prevent potential malfunctions, extend the product's service life and ensure long-term stable operation. All maintenance requirements are formulated according to DENSO's quality standards and HINO Series 2 engines' working characteristics, providing practical support for daily maintenance.



HINO
095000-5302	095000-5321	095000-5332	095000-5333	095000-6401	095000-6510	095000-6511	095000-6520	095000-6521
095000-6540	095000-6551	095000-8470	095000-8480	095000-9510	295050-0760	095000-5393	095000-5402	095000-5990
095000-5991	095000-6350	095000-6352	095000-6353	095000-6612	095000-6950	295050-0240	295050-0920	095000-5223
095000-5224	095000-5225	095000-5226	095000-5970	095000-5972	295050-0490	295050-1600	295050-1890	295050-2580
295050-2730	095000-5273	095000-5280	095000-5283	095000-5284	095000-5960	095000-6583	095000-6592	095000-6593
095000-6602	095000-6753	095000-6811	295050-0790	295050-1170	095000-5212	095000-5213	095000-5214	095000-7171
295050-1590

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.Your choice make difference !

2.The product has undergone a rigorous testing process, and we provide high-quality products;

3.Time is Gold -You will receive all goods exactly on time .

4.We are professional in engine oil supply system;

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector hino 2 23670-e0380 injection valves common rail injectors 295050-0760 23670-e0380 suitable for truck parts 23670-e9260 original new injector, China deere injector hino 2 23670-e0380 injection valves common rail injectors 295050-0760 23670-e0380 suitable for truck parts 23670-e9260 original new injector suppliers, DIESEL Injector 23670 0E010, DIESEL Injector 23670 11020, DIESEL Injector 23670 11040, DIESEL Injector 295700 0560, dpa injection pump, ea888 injectors