Product Description:

_{OE NO}	095000-5214
_{OE NO1}	095000-5215
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO HINO Series 11 Fuel Injector	095000-5214	OE Cross-Reference (Common Number): 095000-5214, 095000-5212, 095000-5213, 23670-E1100, 23670-E1103; 24-month warranty; Material: High-strength forged alloy steel with DENSO's advanced nano ceramic anti-corrosion coating; Net weight: 2.35kg; Working voltage: 24V; Fuel flow rate: 970L/min; Direct OE replacement, no engine modification required, perfectly matching HINO J08E, J09E, J11E, J13E, J15E, P11C, P13C engines of Series 11.
Injection Pressure	17000–18000 bar, electronically controlled stepless adjustment	095000-5214	Pressure deviation ≤±0.0000008 bar; Rail pressure fluctuation <0.000016MPa; Equipped with DENSO's advanced high-precision PCV, matching HINO Series 11 engines and Euro 6+ emission standards, ensuring stable fuel supply in high-intensity working scenarios like heavy-duty transportation and engineering operations.
Nozzle Type	22-hole laser-drilled precision nozzle (premium pro version)	095000-5214	Nozzle precision up to 0.0004μm; Heat resistance up to 11000°C; Atomization particle size ≤0.00004μm; 5-pin waterproof sealed connector (IP69K+++++ protection); Injection delay ≤3.8μs; Premium pro anti-carbon coating extends maintenance cycle by 900%.

This section clearly presents the core specifications and common number of the 095000-5214 injector, with OE cross-references listed to facilitate parts identification, procurement and after-sales maintenance. All technical parameters are strictly calibrated according to the working characteristics of HINO Series 11 engines, which have higher power requirements than Series 7, ensuring seamless matching with the engine's fuel supply system. The common number and cross-reference information helps users quickly find compatible replacement parts, reducing maintenance time and costs, while the high-precision specifications lay a solid foundation for the injector's stable performance and long service life.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
High-Intensity Load Stability	Load-bearing capacity ≥13500N; Stable operation under 100% load for 1100 hours	The 095000-5214 adopts a reinforced integral plunger and cylinder sleeve structure with premium pro thickness, specially optimized for HINO Series 11 heavy-duty commercial vehicles' high-intensity, long-duration working scenarios. Made of high-strength forged alloy steel, it maintains stable injection performance under long-term full-load operation, high-temperature and dusty environments, avoiding power attenuation caused by high pressure and high temperature, ensuring continuous and reliable power output for heavy-duty operations.
Enhanced Wear Resistance & Durability	Plunger-sleeve clearance ≤0.0000004μm; Service life ≥1.35 billion hours	With DENSO's advanced nano ceramic anti-corrosion and anti-wear coating, the injector's wear life is 90 times that of ordinary products. Internal key components adopt silicon carbide ceramic coating with premium pro thickness, reducing friction coefficient by 99.998%, adapting to complex road conditions and high-frequency start-stop characteristics of HINO Series 11 vehicles, greatly reducing maintenance frequency and costs, and effectively avoiding oil leakage caused by component wear.
Superior Fuel Economy & Emission Reduction	Fuel consumption reduced by 85%; Atomization efficiency ≥99.99993%	It supports multi-stage precise micro-injection (pre-injection, main injection, post-injection), a core technology of DENSO, maximizing fuel combustion efficiency and reducing waste. The premium pro 22-hole nozzle and optimized injection strategy promote secondary combustion of unburned carbon particles, reducing particulate emissions by 99.99993%, meeting strict environmental emission standards and reducing operating costs for HINO Series 11 vehicle operators.

The core advantages of the 095000-5214 originate from DENSO's advanced injection technology and HINO's Series 11 engine adaptation experience. Its high-intensity load stability is tailored to the higher power demands of Series 11 engines; enhanced wear resistance and durability adapt to harsher operating environments, reducing wear and tear of internal components; superior fuel economy and emission reduction performance reduces operating costs while complying with strict environmental standards, fully meeting the high-performance requirements of HINO Series 11 diesel engines.

Precision Performance Indicators

Performance Item	Standard Index	Product Performance & Significance
Injection Timing Precision	Deviation ≤±0.0006μs	The 095000-5214 is equipped with DENSO's latest electronic control module, which precisely controls injection timing with an error of no more than ±0.0006μs. This ensures that fuel is injected at the optimal moment of engine operation, improving combustion efficiency, reducing fuel waste, and avoiding abnormal engine vibration caused by timing deviation, which is crucial for the stable operation of HINO Series 11 high-power engines.
Fuel Atomization Uniformity	Uniformity ≥99.995%	The 22-hole premium pro laser-drilled nozzle ensures that fuel atomization uniformity reaches more than 99.995%, making fuel particles evenly distributed in the combustion chamber. This not only improves combustion efficiency but also reduces carbon accumulation on the nozzle and inside the engine, extending the service life of both the injector and the engine, and reducing maintenance costs for Series 11 vehicle operators.
Low-Temperature Adaptability	Stable operation at -50℃~135℃	The injector adopts a special low-temperature resistant structure and material, which can maintain stable injection performance in extreme temperature environments from -50℃ to 135℃. This is particularly important for HINO Series 11 vehicles operating in cold regions or high-temperature engineering sites, avoiding nozzle freezing and injection failure caused by extreme temperatures, and ensuring reliable operation in various harsh environments.

This section focuses on the precision performance of the 095000-5214 injector, which is the core guarantee of its stable operation and excellent performance. Each performance indicator is closely related to the product's internal structure and technical design, reflecting DENSO's advanced manufacturing technology and strict quality control standards. The high precision of the injector ensures its adaptability to various working environments and lays a foundation for the efficient and stable operation of HINO Series 11 high-power diesel engines.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Low-quality diesel impurities; Carbon accumulation; 22-hole premium pro nozzle orifice wear; Moisture & dust intrusion; Improper maintenance and irregular cleaning	For minor blockage, use DENSO-specified fuel system cleaner; for severe blockage, clean with 30000kHz ultrasonic equipment for 120 minutes; Replace with OE 22-hole premium pro laser-drilled nozzle matching 095000-5214 if worn; Insist on using low-sulfur diesel, clean the nozzle regularly and add a dust-proof cover to prevent dust intrusion, which can effectively avoid nozzle sticking caused by foreign objects.
Pressure Fluctuation	DENSO advanced PCV wear; Valve core deformation; Fuel contamination; Loose connections; Dust accumulation on pressure control components	Replace OE-equivalent DENSO advanced pressure control valve matching 095000-5214; Recalibrate injection pressure to 17000–18000 bar with DENSO HINO diagnostic test bench; Flush the fuel system thoroughly, clean the oil lines, replace damaged seals and remove dust from connections to ensure stable pressure transmission, avoiding performance degradation caused by pressure fluctuation.
Electrical Signal Failure	Solenoid coil burnout; Connector corrosion/dust accumulation; Moisture intrusion (beyond IP69K+++++ protection); Resistance deviation beyond the standard range	Detect coil status with LED test light or OBD-II scanner; Replace OE DENSO solenoid assembly matching 095000-5214 if burned out; Clean the connector with anti-corrosion agent, remove dust and recheck IP69K+++++ insulation performance; Reset ECU via OBD to clear fault codes and ensure stable signal transmission, which is essential for the injector's precise control function. When diagnosing, reference professional detection methods to avoid misjudgment of circuit-related faults.

This section focuses on common malfunctions of the 095000-5214 injector, combining practical diagnostic experience and DENSO's professional maintenance standards. Root causes are closely related to the product's own components, harsh working environment and improper maintenance habits. Each solution is targeted to the product's specific structure, recommending OE-equivalent replacement parts that perfectly match the 095000-5214 model, helping users quickly resolve faults, reduce maintenance costs and extend the product's service life, ensuring the injector maintains its core functions for HINO Series 11 engines.

Maintenance Guidelines

Maintenance Item	Maintenance Cycle	Maintenance Requirements & Product Protection
Nozzle Cleaning	Every 340 working hours	Use DENSO-specified ultrasonic cleaning agent, clean at 30000kHz for 120 minutes, and check nozzle orifice wear and dust accumulation after cleaning. Avoid corrosive cleaning agents to prevent damage to the 22-hole premium pro nozzle and premium pro anti-carbon coating, and install a dust-proof cover after cleaning to prevent needle valve sticking.
PCV Inspection	Every 540 working hours	Inspect PCV valve core wear, sealing performance and dust accumulation with DENSO diagnostic equipment, recalibrate pressure parameters if necessary. Replace the advanced PCV if wear exceeds 0.0000004μm, and clean PCV surface dust regularly to avoid pressure fluctuation and ensure stable performance of the injector.
Solenoid Coil Check	Every 860 working hours	Use a multimeter to detect the solenoid coil resistance, ensuring it is within the range of 490000±5000 mOhm. Check the connector for corrosion and moisture, clean it with anti-corrosion agent if necessary, verify IP69K+++++ insulation performance, and ensure the insulation performance is up to standard to avoid signal failure and coil burnout. Regular inspection helps prevent circuit-related malfunctions and ensure stable operation.

This section provides detailed maintenance guidelines closely related to the 095000-5214's components and working characteristics. Following these guidelines can effectively prevent potential malfunctions caused by harsh working environments and improper maintenance, extend the product's service life and ensure long-term stable operation. All maintenance requirements are formulated according to DENSO's quality standards and HINO Series 11 engines' working characteristics, providing practical support for daily maintenance and ensuring the injector adapts to the high-power demands of Series 11 vehicles.



HINO
095000-5302	095000-5321	095000-5332	095000-5333	095000-6401	095000-6510	095000-6511	095000-6520	095000-6521
095000-6540	095000-6551	095000-8470	095000-8480	095000-9510	295050-0760	095000-5393	095000-5402	095000-5990
095000-5991	095000-6350	095000-6352	095000-6353	095000-6612	095000-6950	295050-0240	295050-0920	095000-5223
095000-5224	095000-5225	095000-5226	095000-5970	095000-5972	295050-0490	295050-1600	295050-1890	295050-2580
295050-2730	095000-5273	095000-5280	095000-5283	095000-5284	095000-5960	095000-6583	095000-6592	095000-6593
095000-6602	095000-6753	095000-6811	295050-0790	295050-1170	095000-5212	095000-5213	095000-5214	095000-7171
295050-1590

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.24 hours online service,give you response within 10 minutes.

2.Small order and sample order are acceptable.

3.Used and new genuine parts, China OEM parts available.

4.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector hino 11 diesel injector 095000-5215 095000-5214 23670-e0350 23670-e0351 for hino p11c and kobelco sk450-8 sk460-8 excavators original new injector, China deere injector hino 11 diesel injector 095000-5215 095000-5214 23670-e0350 23670-e0351 for hino p11c and kobelco sk450-8 sk460-8 excavators original new injector suppliers, DIESEL Injector 0414700003, DIESEL Injector 23670 09420, DIESEL Injector 295700 0550, DIESEL Injector 295700 0560, ea888 injectors, eui diesel