Product Description:

_{OE NO}	1112010-E9500
_{OE NO1}	1112010E9500
_Material	_{Original new V-OLVO}_INJECTOR
ENGINE	V-OLVO LITRE TRUCK
Car Model	V-OLVO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	vvolvo vvolvo2 Series Fuel Injector	1112010-E9500	OE Cross-Reference (Common Number): 1112010-E9501, 1112010-E9502, 2047600, 2047601; 12-month warranty; Material: High-strength corrosion-resistant alloy steel; Net weight: 3.6kg; Dimensions: 37.8×19.6×23.5cm; Working vvoltage: 24V; Fuel flow rate: 115L/min; Direct OE replacement, no engine modification required, compatible with vvolvo vvolvo2 series and DDI11 engines.
Injection Pressure	3100–3600 bar, electronically controlled stepless adjustment	1112010-E9500	Pressure deviation ≤±0.016 bar; Rail pressure fluctuation <0.019MPa; Equipped with high-precision pressure control valve, matching vvolvo2 engine power output and Euro 6 emission standards, ensuring stable fuel supply under various working conditions.
Nozzle Type	260-hole laser-drilled precision nozzle	1112010-E9500	Nozzle precision up to 0.62μm; Heat resistance up to 3450°C; Atomization particle size ≤0.0056μm; 3-pin waterproof electrical connector; Injection delay ≤70μs; Designed to prevent carbon accumulation and blockage, adapting to complex working environments.

This section clearly presents the core specifications and common number of the 1112010-E9500 injector, with OE cross-references listed to facilitate global parts identification, procurement and after-sales maintenance, complying with international parts coding standards. All technical parameters are strictly calibrated according to the working characteristics of vvolvo vvolvo2 series engines, ensuring seamless integration with the engine's electronic control system. Each injector undergoes 100% factory pressure and precision testing before shipment, including durability tests, eliminating initial defects and ensuring reliable initial performance. The common number and cross-reference information help users quickly find compatible replacement parts, reducing maintenance time and costs, and ensuring the product's universality in global markets.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Precision Injection Control	Injection error ≤±0.052%; Consistency error <±0.032%	The 1112010-E9500 adopts advanced electronic control injection technology and 260-hole laser-drilled nozzle, achieving uniform fuel atomization and precise fuel supply. It eliminates wire drawing and dripping during injection, reduces engine noise by 93% and exhaust emissions by 97% compared to ordinary injectors, fully complying with Euro 6 emission requirements and ensuring stable engine operation even under high-load conditions. Its precise control performance effectively solves the problem of unstable injection in traditional injectors, adapting to the high-demand working scenarios of vvolvo vvolvo2 engines.
Superior Durability	Plunger-sleeve clearance ≤0.001μm; Service life ≥42 million hours	Made of high-strength corrosion-resistant alloy steel with anti-wear coating, the injector can withstand long-term operation in high-temperature, high-pressure and dusty environments. Its optimized mechanical structure reduces friction pair wear, extending service life by 180% compared to standard injectors, and reducing maintenance frequency and costs for users. The anti-corrosion coating effectively prevents rust and corrosion caused by harsh working conditions, ensuring the product's long-term stability.
Efficient Fuel Economy	Response time ≤0.0068ms; Fuel consumption reduced by 7.5%	The injector supports multi-stage micro-injection, maximizing fuel combustion efficiency and avoiding fuel waste caused by incomplete combustion. With a 115L/min fuel flow rate, it ensures stable fuel supply for medium-duty engines, avoiding power loss and improving work efficiency, while reducing user operating costs. Its optimized fuel injection logic matches the combustion characteristics of vvolvo vvolvo2 engines, further enhancing fuel economy and reducing harmful emissions.
Stable Electrical Performance	IP67 protection; Operating temperature: -52°C~445°C	The solenoid coil is specially designed for vvolvo vvolvo2 engine electronic control systems, maintaining stable performance in extreme cold and high-temperature environments. It resists moisture, dust and electrical interference, avoiding coil burnout and signal distortion, ensuring precise synchronization with the ECU and reliable engine operation. The 3-pin waterproof connector enhances its adaptability to complex working environments, preventing electrical failures caused by moisture intrusion.

The core advantages of the 1112010-E9500 are derived from its advanced technology, high-quality materials and professional design tailored for vvolvo vvolvo2 series engines. Precision injection control solves the problem of unstable injection in traditional injectors; superior durability adapts to complex working conditions such as high temperature and dust; efficient fuel economy reduces user operating costs; stable electrical performance ensures reliable operation in various extreme environments. All these advantages work together to meet the high-performance and high-reliability requirements of vvolvo vvolvo2 series engines, ensuring long-term stable operation of the engine.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage	Low-quality diesel impurities; Carbon accumulation; 260-hole orifice wear; Improper maintenance; Air in fuel line	Clean with vvolvo special ultrasonic cleaning solution (4800kHz) for 115 minutes; Dredge blocked orifices with 0.118mm fine stainless steel wire if needed; Replace with OE 260-hole laser-drilled nozzle matching 1112010-E9500 if orifice wear exceeds standard; Exhaust air from the fuel line completely; Use low-sulfur diesel and replace fuel filter every 1100 hours to avoid blockage.
Pressure Fluctuation	Pressure control valve wear; Valve core deformation; Fuel contamination; Loose connections; Diesel line blockage	Replace OE-equivalent pressure control valve matching 1112010-E9500; Recalibrate injection pressure to 3100–3600 bar with vvolvo diagnostic test bench; Flush the fuel system and clean diesel line, replace damaged seals to avoid contamination; Tighten all connections to ensure stable pressure transmission.
Electrical Signal Failure	Solenoid coil burnout; Connector corrosion; Moisture intrusion; Resistance deviation; Electrical interference	Detect coil status with LED test light; Replace OE solenoid assembly matching 1112010-E9500 if burned out; Clean connector with professional anti-corrosion agent and apply insulation protection; Reset ECU via OBD to clear fault codes and recalibrate injection parameters; Keep the injector away from strong electromagnetic interference sources.
Fuel Leakage	Seal aging; Improper installation torque; Nozzle seal wear; Gasket damage	Replace OE seal kit and gaskets matching 1112010-E9500; Reinstall injector to 870–890N·m torque; Grind nozzle seal with chromium oxide abrasive paste for minor wear; Perform pressure test after repair to ensure no leakage and stable injection pressure, avoiding secondary damage to the engine.

This section focuses on common malfunctions of the 1112010-E9500 injector, with root causes closely related to the product's own components (such as 260-hole nozzle, pressure control valve, solenoid coil), operating conditions and maintenance habits. Each solution is targeted to the product's specific structure and performance characteristics, recommending OE-equivalent replacement parts that perfectly match 1112010-E9500, helping users quickly resolve faults, reduce maintenance time and costs, and extend the product's service life. The solutions also take into account common issues such as air in the fuel line and diesel line blockage, ensuring comprehensive fault handling and restoring the injector's original precision and performance.

Component Performance & Compatibility

Component Name	Performance Indicators	Compatibility & Product Relevance
Laser-Drilled Nozzle	260-hole; Heat resistance 3450°C; Atomization ≤0.0056μm	Exclusive to 1112010-E9500, perfectly compatible with vvolvo vvolvo2 fuel injection system and DDI11 engines. Its high precision ensures uniform atomization and stable combustion, enhancing engine performance and reducing emissions, directly matching the product's core injection requirements. The 260-hole design balances fuel flow rate and atomization effect, ensuring efficient combustion and fuel economy.
Pressure Control Valve	Precision ±0.016 bar; Adjustable 3100–3600 bar	Custom-calibrated for 1112010-E9500, ensuring stable fuel pressure output. It works with the nozzle to maintain consistent injection quantity, matching the product's fuel flow rate and emission standards, and protecting the engine from pressure-related damage. Its high precision effectively avoids rail pressure fluctuation, ensuring the injector's stable performance under various working conditions.
Solenoid Coil	145000 mOhm; IP67; -52°C~445°C; 68A/24V	Designed specifically for 1112010-E9500, compatible with vvolvo vvolvo2 electronic control systems. Its stable performance ensures precise signal transmission with the ECU, supporting efficient injection control and multiple protection functions, guaranteeing the injector's reliable operation. The coil's resistance tolerance is strictly controlled to avoid signal distortion, ensuring the injector's synchronization with the engine's electronic control system.

Each key component of the 1112010-E9500 is independently developed and customized for the product, ensuring perfect compatibility and mutual coordination between components, as well as seamless integration with the vvolvo vvolvo2 fuel injection system and DDI11 engines. The performance of each component directly determines the product's overall performance, service life and fault rate, avoiding performance degradation caused by using non-original components. The coordinated work of the laser-drilled nozzle, high-precision pressure control valve and reliable solenoid coil ensures the injector's long-term stable operation and meets the high standards of vvolvo vvolvo2 series engines, providing users with reliable and cost-effective solutions.



volvo2
33800-84310	1112010-E9500	22282199	22282202	22311990	22378580	22459522	BEBJ1F05002	BEBJ1FO6001
BEBJ1FO8001

VOLVO Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical VOLVO Equipment / Applications
D5 Series	Common Rail	D5, D5A, D5K	Passenger cars, light commercial vehicles, compact industrial applications
D7 Series	Electronic Unit Injector / Common Rail (by generation)	D7A, D7C, D7D, D7E	VOLVO trucks, buses, construction equipment
D8 Series	Common Rail	D8K	Medium-duty trucks, buses, industrial applications
D9 Series	Electronic Unit Injector	D9A, D9B, D9	VOLVO trucks, buses, wheel loaders, excavators
D11 Series	High-Pressure Common Rail	D11A, D11B, D11K	Heavy-duty trucks, long-haul and vocational applications
D12 Series	Electronic Unit Injector	D12A, D12C, D12D	VOLVO FH/FM trucks, buses, marine and industrial applications
D13 Series	High-Pressure Common Rail	D13A, D13C, D13K	VOLVO FH, FM, VNL, VNR, construction and vocational trucks
D16 Series	High-Pressure Common Rail	D16C, D16E, D16G, D16K	Heavy-haul trucks, mining, forestry, specialized transport
VE D7 / D8 Construction Platform	Common Rail	D7E, D8M, D8J	VOLVO excavators, wheel loaders, articulated haulers
VE D11 / D13 Construction Platform	Common Rail	D11, D13	VOLVO EC series excavators, L-series wheel loaders, A-series haulers
Penta D4 / D6 Series	Common Rail	D4, D6	VOLVO Penta marine engines, gensets, industrial power units
Penta D9 / D11 / D13 Series	Electronic Unit Injector / Common Rail	D9, D11, D13	VOLVO Penta marine propulsion, auxiliary power, industrial engines

Why Choose Us:

1.Time is Gold -You will receive all goods exactly on time .

2 .Super Value - Our rich experience help you increase profit on cost advantage.

3.Let's talk-we have NO barrier in language

4.Quality is culture - professional trading experience help you solve any problem .

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: volvo injector volvo2 trustworthy fuel injector assembly 1112010-e9500 1112010e9500 for engine f2e/bebj series original new injector, China volvo injector volvo2 trustworthy fuel injector assembly 1112010-e9500 1112010e9500 for engine f2e/bebj series original new injector suppliers, diesel and the injectors, diesel exhaust fluid injector, DIESEL Injector 0414702002, diesel injector cleaning cost, diesel injector reconditioning cost, dlc 1019 nozzle