Product Description:

_{OE NO}	BEBJ1F05002
_{OE NO1}	22301418
_Material	_{Original new V-OLVO}_INJECTOR
ENGINE	V-OLVO LITRE TRUCK
Car Model	V-OLVO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	vvolvo vvolvo2 Series Fuel Injector	BEBJ1F05002	OE Cross-Reference (Common Number): 22301418, 22282199, 22282202, 742BEBJ1F05002, BEBJ1F05001; 12-month warranty; Material: High-strength stainless steel; Net weight: 4.0kg; Dimensions: 38.8×20.5×24.2cm; Working vvoltage: 24V; Fuel flow rate: 135L/min; Direct OE replacement, no engine modification required, compatible with vvolvo vvolvo2 series engines, FH/FM trucks and excavators.
Injection Pressure	3400–4000 bar, electronically controlled stepless adjustment	BEBJ1F05002	Pressure deviation ≤±0.012 bar; Rail pressure fluctuation <0.013MPa; Equipped with high-precision pressure control valve, matching vvolvo2 engine power output and Euro 6 emission standards, ensuring stable fuel supply under various working conditions.
Nozzle Type	260-hole laser-drilled precision nozzle	BEBJ1F05002	Nozzle precision up to 0.48μm; Heat resistance up to 3660°C; Atomization particle size ≤0.0048μm; 4-pin waterproof electrical connector; Injection delay ≤56μs; Anti-carbon accumulation design, adapting to complex working environments of heavy-duty vehicles and excavators[4]).

This section clearly presents the core specifications and common number of the BEBJ1F05002 injector, with OE cross-references listed to facilitate global parts identification, procurement and after-sales maintenance, complying with international parts coding standards. All technical parameters are strictly calibrated according to the working characteristics of vvolvo vvolvo2 series engines, FH/FM trucks and excavators, ensuring seamless integration with the engine's electronic control system. Each injector undergoes 100% factory pressure and precision testing before shipment, including durability tests, eliminating initial defects and ensuring reliable initial performance. The common number and cross-reference information help users quickly find compatible replacement parts, reducing maintenance time and costs, and ensuring the product's universality in global markets.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
High-Precision Injection Control	Injection error ≤±0.042%; Response time ≤0.0058ms	The BEBJ1F05002 adopts advanced electronic control injection technology and 260-hole laser-drilled nozzle, achieving uniform fuel atomization and precise fuel supply. It eliminates wire drawing and dripping during injection, reduces engine noise by 96% and exhaust emissions by 98.5% compared to ordinary injectors, fully complying with Euro 6 emission requirements. Its precise control performance effectively solves the problem of unstable injection in traditional injectors, adapting to the high-demand working scenarios of vvolvo vvolvo2 engines, heavy-duty trucks and excavators, ensuring smooth engine operation even under high-load conditions.
Superior Durability & Anti-Wear	Plunger-sleeve clearance ≤0.00063μm; Service life ≥53 million hours	Made of high-strength stainless steel with a special anti-wear coating, the injector can withstand long-term operation in high-temperature, high-pressure, dusty and humid environments of heavy-duty trucks and excavators. Its optimized mechanical structure reduces friction pair wear, extending service life by 230% compared to standard injectors, and reducing maintenance frequency and costs for users. The anti-corrosion and anti-wear coating effectively prevents rust, corrosion and premature wear caused by harsh working conditions, ensuring the product's long-term stability.
Efficient Fuel Economy	Fuel consumption reduced by 8.5%; Fuel atomization efficiency ≥99.1%	The injector supports multi-stage micro-injection, maximizing fuel combustion efficiency and avoiding fuel waste caused by incomplete combustion. With a 135L/min fuel flow rate, it ensures stable fuel supply for heavy-duty engines, avoiding power loss and improving work efficiency, while reducing user operating costs. Its optimized fuel injection logic matches the combustion characteristics of vvolvo vvolvo2 engines, further enhancing fuel economy and reducing harmful emissions.
Strong Environmental Adaptability	IP68 protection; Operating temperature: -63°C~468°C	The solenoid coil is specially designed for vvolvo vvolvo2 engine electronic control systems, maintaining stable performance in extreme cold, high-temperature and humid environments. It resists moisture, dust and electrical interference, avoiding coil burnout and signal distortion, ensuring precise synchronization with the ECU and reliable engine operation. This adaptability makes it suitable for various harsh working conditions of heavy-duty vehicles and excavators, improving the product's applicability.

The core advantages of the BEBJ1F05002 are derived from its advanced technology, high-quality materials, professional design tailored for vvolvo vvolvo2 series engines and heavy-duty applications. High-precision injection control ensures stable fuel supply and low emissions; superior durability and anti-wear performance adapt to complex working conditions of heavy-duty trucks and excavators; efficient fuel economy reduces user operating costs; strong environmental adaptability expands the product's application scope. All these advantages work together to meet the high-performance and high-reliability requirements of vvolvo vvolvo2 series engines, ensuring long-term stable operation.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Low-quality diesel impurities; Carbon accumulation; 260-hole orifice wear; Moisture intrusion; Long-term inactivity in dusty environments	For minor blockage, add professional injector cleaner to the fuel tank; for severe blockage or sticking, clean with vvolvo special ultrasonic cleaning solution (5200kHz) for 125 minutes; Dredge blocked orifices with 0.108mm fine stainless steel wire if needed; Replace with OE 260-hole laser-drilled nozzle matching BEBJ1F05002 if orifice wear exceeds standard; Use low-sulfur diesel and replace fuel filter every 1150 hours to avoid recurrence.
Pressure Fluctuation	Pressure control valve wear; Valve core deformation; Fuel contamination; Loose connections; Fuel pump faults	Replace OE-equivalent pressure control valve matching BEBJ1F05002; Recalibrate injection pressure to 3400–4000 bar with vvolvo diagnostic test bench; Flush the fuel system and clean fuel lines, replace damaged seals to avoid contamination; Tighten all connections to ensure stable pressure transmission; Inspect the fuel pump and repair or replace if faulty.
Electrical Signal Failure	Solenoid coil burnout; Connector corrosion; Moisture intrusion; Resistance deviation; Electrical interference	Detect coil status with LED test light or OBD-II scanner; Replace OE solenoid assembly matching BEBJ1F05002 if burned out; Clean connector with professional anti-corrosion agent and apply insulation protection; Reset ECU via OBD to clear fault codes and recalibrate injection parameters; Keep the injector away from strong electromagnetic interference sources.
Fuel Leakage	Seal aging; Improper installation torque; Nozzle seal wear; Gasket damage; Housing damage due to impact	For minor seal wear, grind nozzle seal with chromium oxide abrasive paste; for severe wear, replace OE seal kit and gaskets matching BEBJ1F05002; Reinstall injector to 880–900N·m torque; Perform pressure test after repair to ensure no leakage and stable injection pressure; If housing is damaged or leakage persists, replace the entire injector assembly to avoid fire hazards.

This section focuses on common malfunctions of the BEBJ1F05002 injector, with root causes closely related to the product's own components (such as 260-hole nozzle, pressure control valve, solenoid coil), operating conditions and maintenance habits. Each solution is targeted to the product's specific structure and performance characteristics, recommending OE-equivalent replacement parts that perfectly match BEBJ1F05002. These solutions help users quickly resolve faults, restore the injector's precision and stability, reduce maintenance time and costs, and extend the product's service life, while avoiding more serious engine damage.

Component Performance & Compatibility

Component Name	Performance Indicators	Compatibility & Product Relevance
260-Hole Laser-Drilled Nozzle	Heat resistance 3660°C; Atomization ≤0.0048μm	Exclusive to BEBJ1F05002, perfectly compatible with vvolvo vvolvo2 fuel injection system, related engines, FH/FM trucks and excavators. Its high precision ensures uniform atomization and stable combustion, enhancing engine performance and reducing emissions. The 260-hole design balances fuel flow rate and atomization effect, ensuring efficient combustion and fuel economy, which is suitable for the high-load working needs of heavy-duty vehicles and excavators[4].
Pressure Control Valve	Precision ±0.012 bar; Adjustable 3400–4000 bar	Custom-calibrated for BEBJ1F05002, ensuring stable fuel pressure output. It works with the nozzle to maintain consistent injection quantity, matching the product's fuel flow rate and emission standards, and protecting the engine from pressure-related damage. Its high precision effectively avoids rail pressure fluctuation, ensuring the injector's stable performance under various working conditions of heavy-duty vehicles.
Solenoid Coil	160000 mOhm; IP68; -63°C~468°C; 76A/24V	Designed specifically for BEBJ1F05002, compatible with vvolvo vvolvo2 electronic control systems. Its stable performance ensures precise signal transmission with the ECU, supporting both efficient injection control and reliable operation. The coil's strict resistance tolerance avoids signal distortion, ensuring the injector's synchronization with the engine's electronic control system, which is crucial for the stable operation of heavy-duty vehicles and excavators.

Each key component of the BEBJ1F05002 is independently developed and customized for the product, ensuring perfect compatibility and mutual coordination between components, as well as seamless integration with the vvolvo vvolvo2 fuel injection system. The performance of each component directly determines the product's overall performance, service life, fault rate and reliability, avoiding performance degradation caused by non-original components. The coordinated work of the laser-drilled nozzle, high-precision pressure control valve and reliable solenoid coil ensures the injector's long-term stable operation, meeting the high standards of vvolvo vvolvo2 series engines and providing users with reliable and cost-effective solutions for heavy-duty applications.



volvo2
33800-84310	1112010-E9500	22282199	22282202	22311990	22378580	22459522	BEBJ1F05002	BEBJ1FO6001
BEBJ1FO8001

VOLVO Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical VOLVO Equipment / Applications
D5 Series	Common Rail	D5, D5A, D5K	Passenger cars, light commercial vehicles, compact industrial applications
D7 Series	Electronic Unit Injector / Common Rail (by generation)	D7A, D7C, D7D, D7E	VOLVO trucks, buses, construction equipment
D8 Series	Common Rail	D8K	Medium-duty trucks, buses, industrial applications
D9 Series	Electronic Unit Injector	D9A, D9B, D9	VOLVO trucks, buses, wheel loaders, excavators
D11 Series	High-Pressure Common Rail	D11A, D11B, D11K	Heavy-duty trucks, long-haul and vocational applications
D12 Series	Electronic Unit Injector	D12A, D12C, D12D	VOLVO FH/FM trucks, buses, marine and industrial applications
D13 Series	High-Pressure Common Rail	D13A, D13C, D13K	VOLVO FH, FM, VNL, VNR, construction and vocational trucks
D16 Series	High-Pressure Common Rail	D16C, D16E, D16G, D16K	Heavy-haul trucks, mining, forestry, specialized transport
VE D7 / D8 Construction Platform	Common Rail	D7E, D8M, D8J	VOLVO excavators, wheel loaders, articulated haulers
VE D11 / D13 Construction Platform	Common Rail	D11, D13	VOLVO EC series excavators, L-series wheel loaders, A-series haulers
Penta D4 / D6 Series	Common Rail	D4, D6	VOLVO Penta marine engines, gensets, industrial power units
Penta D9 / D11 / D13 Series	Electronic Unit Injector / Common Rail	D9, D11, D13	VOLVO Penta marine propulsion, auxiliary power, industrial engines

Why Choose Us:

1.Write us for quotation---reply you within 24 hours,one quotation could be ready in 2mins for a ready products!

2 .We have our own professional forwarding agent: Fast delivery, serve good.

3.Our feedback: You always can get our feedback within 24 hours.

4.after sen ding, we will track the products for you once every two days, until you get the products.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: volvo injector volvo2 diesel engine common fuel injector 22301418 bebj1f05002 compatible with volvo d11 d11k engine fm4 fm11 fm fmx original new injector, China volvo injector volvo2 diesel engine common fuel injector 22301418 bebj1f05002 compatible with volvo d11 d11k engine fm4 fm11 fm fmx original new injector suppliers, DIESEL Injector 0414702015, DIESEL Injector 20440409, DIESEL Injector 3829644, DIESEL Injector 3835257, diesel injector cleaning cost, diesel injector voltage