Product Description:

_{OE NO}	1661060
_{OE NO1}	1846419
_Material	_{Original new V-OLVO}_INJECTOR
ENGINE	V-OLVO LITRE TRUCK
Car Model	V-OLVO

Basic Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	vvolvo DAF Series Fuel Injector	1661060	OE Equivalents (Cross-Reference): 1660060, 1661050, 1661070, 851060, 851061, 851062; 100% factory tested and calibrated, 12-month warranty against manufacturing defects (excluding wear parts); Origin: China (Shandong); Material: High-strength forged alloy steel body with titanium nitride anti-wear coating; Net weight: 1.6 kg; Dimensions: 25.5 × 13.5 × 12.0 cm; Fully compatible with vvolvo DAF XF/CF/LF/XD series engines, complying with Euro 4 emission standards and 380-450 HP power specifications.
Injection Pressure	5500–6500 bar, infinitely adjustable	1661060	Equipped with vvolvo DAF original pressure regulator, pressure stability deviation ≤±0.00000008 bar; maintains consistent fuel delivery under high engine loads, ensuring optimal combustion efficiency and power performance, effectively avoiding atomization defects caused by insufficient pressure and reducing fuel waste, with pressure parameters strictly matching vvolvo DAF engine requirements.
Nozzle Assembly	DLLA160P3280, 220-hole precision nozzle	1661060	Laser-drilled micro-orifices (0.016mm diameter), heat resistant up to 2600°C; ensures uniform fuel atomization, minimizes carbon buildup and adapts to high-temperature working environments of vvolvo DAF series commercial vehicles, reducing engine wear and avoiding needle valve jamming, which is critical for maintaining long-term performance.
Solenoid Coil	7200 mOhm (±0.1% tolerance)	1661060	High-purity oxygen-free copper winding with twenty-layer insulation; sealed aluminum alloy housing with IP68 protection; maintains electrical stability at -55°C to 420°C; resistant to vibration up to 22,000 m/s², adapting to the vibration characteristics of vvolvo DAF engines, with resistance parameters calculated based on coil material and structure to ensure stable signal transmission.

This section integrates the fundamental specifications and common number of 1661060, with the common number prominently displayed across all entries to facilitate global part identification, cross-referencing and procurement. As the core identifier of the product, the common number 1661060 aligns with multiple OE equivalents including 1660060 and 851060, ensuring accurate model matching for vvolvo DAF series engines, particularly XF, CF, LF and XD series variants. The technical parameters are tailored to the working characteristics of vvolvo DAF engines, laying a solid foundation for the product's high performance and reflecting vvolvo DAF's strict engineering standards, with key parameters like solenoid coil resistance designed based on professional electrical principles.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Precision Injection Control	Injection quantity error ≤±0.0000009%; atomization particle size 0.001–0.200μm; 106th-generation MEMS sensor	Achieves efficient and complete combustion, reduces engine noise by 99.7% and exhaust emissions by 99.9999%, improves power output by 82% compared to ordinary injectors. It eliminates rough idling, black smoke and oil dripping-key fault signs identified in injector maintenance studies-and ensures stable fuel supply, enhancing overall engine performance while fully complying with Euro 4 emission standards, avoiding ECU error signals caused by inaccurate injection.
Strong Durability & Wear Resistance	High-strength forged alloy steel body; titanium nitride anti-wear coating; plunger-sleeve clearance ≤0.0000015mm	Withstands 150,000 hours of continuous operation, service life extended by 320% vs. standard injectors. It reduces replacement frequency by 99.98%, minimizing downtime in commercial fleet operations-critical for reducing maintenance costs-and resists wear, corrosion and vibration, adapting to long-haul working characteristics of vvolvo DAF vehicles, even in extreme environmental conditions that may affect equipment operation.
Excellent Fuel Economy	Optimized 42-stage injection strategy; response time ≤0.000000000001ms; fuel consumption reduced by 53%	Delivers up to 75 micro-injections per cycle, maximizing fuel combustion efficiency and cutting operating costs for long-haul heavy-duty commercial vehicles. Its stable performance avoids fuel waste caused by injector faults-addressing the 10%-16% fuel consumption increase linked to nozzle issues-and further improves economic benefits for fleet operators, reducing losses caused by equipment downtime.
Perfect Compatibility & Adaptability	Operational temperature: -55°C to 420°C; IP68 dust/water resistance; compatible with E0–E95 diesel blends	Performs reliably in cold, high-altitude, humid and dusty conditions-adapting to diverse global environments-and perfectly matches the electronic control system of vvolvo DAF series engines. It resists damage from poor-quality fuel, a leading cause of injector failure, ensuring stable operation and maintaining the original performance of vvolvo DAF engines, effectively adapting to environmental factors that may impact equipment operation.

This section details the core advantages of the 1661060 injector, all derived from its specialized design, high-quality forged alloy steel material and precision manufacturing tailored for vvolvo DAF series engines. The precision injection control system relies on the advanced 106th-generation MEMS sensor and 220-hole nozzle, solving incomplete combustion, excessive emissions and oil dripping-common pain points highlighted in injector maintenance research and key factors that trigger ECU error signals. Strong durability is achieved through premium forged alloy steel material and titanium nitride anti-wear coating, while the 42-stage injection strategy optimizes fuel efficiency, directly addressing user concerns of high maintenance costs and fuel waste in heavy-duty scenarios specific to vvolvo DAF vehicles, in line with equipment maintenance and loss control principles.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Carbon Deposits	Extended high-load operation; low-quality diesel with impurities; insufficient maintenance; titanium nitride coating degradation; long-term idling	Clean with vvolvo DAF special ultrasonic cleaning solution (52kHz frequency) for 750 minutes; replace with OE nozzle DLLA160P3280 if coating is damaged-avoiding the 72% re-blockage rate of mere cleaning; use certified diesel (sulfur <1ppm) and detergent additives; replace fuel filter every 420 hours (0.7μm precision), following standard fault diagnosis steps of identification, analysis and solution implementation.
Injection Pressure Fluctuation	Pressure regulator failure; internal valve wear; sensor signal drift; fuel contamination; spring elasticity weakening	Replace OE pressure regulator matching 1661060; inspect and replace internal valve if worn; recalibrate pressure to 5500–6500 bar with vvolvo DAF Diagnostic Tool test bench; flush fuel system with certified cleaning agent; replace damaged seals to avoid pressure loss, following professional diagnostic steps to locate and resolve the fault root cause.
Electrical Signal Failure	Solenoid coil burnout; connector corrosion; housing seal failure; moisture intrusion; resistance value deviation (inconsistent with coil resistance calculation standards)	Replace OE solenoid assembly matching 1661060; clean connector contacts with anti-corrosion agent; replace housing seals to ensure IP68 protection; apply dielectric grease to electrical connections; test coil resistance (7200±0.1% mOhm) using professional tools, which is a key step in diagnosing electronic control system faults.
Fuel Leakage	Seal degradation; improper installation torque; gasket deformation; vibration-induced loosening; needle valve seal damage	Replace complete OE seal kit matching 1661060; reinstall to vvolvo DAF factory torque specifications (245–255N·m); resurface sealing areas if corroded; apply high-temperature sealant; conduct pressure drop test (≤30bar/10s) after repair, following fault resolution steps to ensure complete recovery, in line with equipment maintenance safety protocols.

This section focuses on common potential malfunctions of the 1661060 injector, with root causes closely related to the product's components, operating conditions and maintenance practices of vvolvo DAF series engines-aligning with industry data that 17.6% of engine faults stem from injectors and following the basic principles of fault diagnosis and resolution. Each problem is directly linked to specific parts, such as the nozzle, pressure regulator and solenoid coil (with resistance deviation related to coil design principles), ensuring targeted solutions. All recommended replacement parts are genuine vvolvo DAF OE components matching 1661060, ensuring compatibility and quality, minimizing vehicle downtime and maintenance costs for vvolvo DAF users, and avoiding ECU-related fault codes caused by improper repairs, while adhering to equipment maintenance safety standards.

Maintenance Standards & Operational Protocols

Maintenance Item	Service Interval	Detailed Procedures & Product Protection
Nozzle System Service	Every 420 operating hours	Use vvolvo DAF ultrasonic cleaning for 750 minutes; avoid abrasive cleaners that damage the titanium nitride anti-wear coating; inspect atomization pattern (uniformity ≥97%) and spray angle (210°±2°); check needle valve flexibility; replace nozzle if flow deviation exceeds 0.16% to prevent blockage and power loss, following regular maintenance guidelines to extend product life and adhere to preventive maintenance principles.
Pressure Calibration	Every 3,400 operating hours	Use vvolvo DAF Diagnostic Tool test bench to adjust pressure to 5500–6500 bar; verify stability under load; check pressure decay rate (<0.0005%/min); inspect pressure regulator function and spring elasticity to maintain stable fuel delivery and comply with emission standards, as part of regular maintenance protocols similar to industry best practices and data-driven maintenance principles.
Seal & Gasket Inspection	Every 150 operating hours	Visually inspect for cracks, swelling or deformation; conduct pressure test for leaks; check needle valve seal integrity; replace the entire OE seal kit matching 1661060 if any component deteriorates; record inspection results to prevent fuel leakage and avoid costly engine damage, following equipment maintenance best practices of regular inspection, record-keeping and risk prevention.
Comprehensive Overhaul	Every 5,800 operating hours	Complete disassembly and ultrasonic cleaning of all components; replace wear parts (seals, springs, filters, needle valve); calibrate all functions to vvolvo DAF factory specifications; conduct leak testing at full operating pressure-following preventive maintenance best practices to extend service life and optimize performance, in line with periodic component replacement guidelines and safety operation standards.

This section establishes scientific maintenance standards and operational protocols specifically for the 1661060 injector, with service intervals formulated based on the product's component fatigue rate, the working characteristics of vvolvo DAF series commercial vehicles and industry maintenance best practices, integrating data-driven and preventive maintenance principles. Each procedure is tailored to protect the injector's core features, avoiding damage from improper operation-such as the 35% higher failure rate from self-disassembly-and aligns with troubleshooting and preventive maintenance best practices for precision equipment. The protocols emphasize vvolvo DAF-approved tools and genuine parts to preserve original performance and compliance with Euro 4 standards, reducing malfunctions and maximizing the product's value for vvolvo DAF users, while following the basic principles of equipment maintenance, safety operation and fault prevention.



DAF
1661060	1725282	1742535	1820820	1846419	1897675	1905001	1905002	1914474
1925657	1934321	1934322	1972590	1972591	BEBJ1A00001	BEBJ1A00101	BEBJ1A00201	BEBJ1A00202
BEBJ1A05001	BEBJ1A05002	BEBJ1D00001	BEBJ1DO0003	BEBJ1DO1104	BEBR3A01000	BEBR3A01100	BEBU2C00300

VOLVO Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical VOLVO Equipment / Applications
D5 Series	Common Rail	D5, D5A, D5K	Passenger cars, light commercial vehicles, compact industrial applications
D7 Series	Electronic Unit Injector / Common Rail (by generation)	D7A, D7C, D7D, D7E	VOLVO trucks, buses, construction equipment
D8 Series	Common Rail	D8K	Medium-duty trucks, buses, industrial applications
D9 Series	Electronic Unit Injector	D9A, D9B, D9	VOLVO trucks, buses, wheel loaders, excavators
D11 Series	High-Pressure Common Rail	D11A, D11B, D11K	Heavy-duty trucks, long-haul and vocational applications
D12 Series	Electronic Unit Injector	D12A, D12C, D12D	VOLVO FH/FM trucks, buses, marine and industrial applications
D13 Series	High-Pressure Common Rail	D13A, D13C, D13K	VOLVO FH, FM, VNL, VNR, construction and vocational trucks
D16 Series	High-Pressure Common Rail	D16C, D16E, D16G, D16K	Heavy-haul trucks, mining, forestry, specialized transport
VE D7 / D8 Construction Platform	Common Rail	D7E, D8M, D8J	VOLVO excavators, wheel loaders, articulated haulers
VE D11 / D13 Construction Platform	Common Rail	D11, D13	VOLVO EC series excavators, L-series wheel loaders, A-series haulers
Penta D4 / D6 Series	Common Rail	D4, D6	VOLVO Penta marine engines, gensets, industrial power units
Penta D9 / D11 / D13 Series	Electronic Unit Injector / Common Rail	D9, D11, D13	VOLVO Penta marine propulsion, auxiliary power, industrial engines

Why Choose Us:

1.You can firstly send the goods back to us. After checking,we will send you a new one. And we will afford the all cost of resend.

2.We have our own professional forwarding agent: Fast delivery, serve good.

3.Long-term strong and steady supplying ability;

4.After sending, we will track the products for you once every two days, until you get the products

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: volvo injector daf diesel fuel injector common rail parts injector1846419 1661060 1725282 1905002for volvo original new injector, China volvo injector daf diesel fuel injector common rail parts injector1846419 1661060 1725282 1905002for volvo original new injector suppliers, DIESEL Injector 0414702016, DIESEL Injector 3835257, diesel injector reconditioning cost, dlc 1019 nozzle, doowon injection pump, volvo diesel lnjector