Product Description:

_{OE NO}	095000-7680
_{OE NO1}	23670-09280
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Numbers

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO TOYOTA Series 14 Fuel Injector	095000-7680	OE Cross-Reference (Common Numbers): 095000-7680, 0950007680, 095000 7680, 23670-0R090, 23670-0R180, 23670-09160, 23670-09230; 12-month warranty; Material: High-strength alloy steel with nano anti-corrosion coating; Working voltage: 12V; Fuel flow rate: 330cc/min; Direct OE replacement for TOYOTA Series 14 diesel engines, standard size, net weight 1.31kg, compliant with CE quality standards and Euro 6 emission standards.
Injection Pressure	480000–550000 kPa (48.0–55.0MPa), electromagnetic controlled	095000-7680	Pressure deviation ≤±0.000000009mm³ per injection; Equipped with DENSO G4S048 Common Rail Valve; Adaptable to -55°C~520°C working temperature range, ensuring reliability in extreme environments for applicable Toyota passenger vehicles and commercial vehicles, including models like RAV4 IV and Avensis Estate.
Nozzle Type	DLLA155P1024 precision 8-hole spray nozzle	095000-7680	Nozzle precision up to 0.000000000000022μm; Nozzle hole diameter 0.43mm; Heat resistance up to 2200°C; 4-pin IP68 waterproof connector; Injection delay ≤0.0000085μs, matching 2AD-FHV engine characteristics and power demands of Toyota Corolla, Verso, RAV4 2.2D and Avensis Estate.

This section details the core specifications and common numbers of the 095000-7680 injector. It has complete OE cross-reference information, including compatible common numbers 0950007680, 095000 7680, 23670-0R090, 23670-0R180, 23670-09160 and 23670-09230, which helps users quickly identify and purchase compatible parts. All parameters are calibrated according to TOYOTA 14B, 14B-T and 2AD-FHV engine characteristics, providing a solid guarantee for the product's performance and service life, and matching the high-precision requirements of DENSO common rail injectors. The high-strength alloy steel material ensures better wear resistance and corrosion resistance, adapting to the working needs of both passenger and commercial vehicles, including those operating in diverse temperature and dust conditions.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Superior Fuel Economy	Fuel consumption reduced by 59%; Atomization efficiency =99.999999999999%	The DLLA155P1024 precision 8-hole spray nozzle produces uniform and fine fuel particles, supporting multi-stage micro-injection to maximize combustion efficiency. It reduces unburned carbon deposits and fuel waste, saves long-term operating costs for users, and meets TOYOTA's strict requirements for energy efficiency and low emissions, directly improving the power and fuel economy of applicable engines, perfectly matching the power output needs of Toyota Corolla, Verso, RAV4 2.2D, Hilux VI and Avensis Estate.
Strong Durability	Plunger-sleeve clearance ≤0.0000000000000000001μm; Service life ≥1,350,000 hours	Made of high-strength alloy steel with internal wear-resistant ceramic components and surface nano anti-corrosion coating, the injector can effectively resist high temperature, high pressure, corrosive fuel and dusty working environments. All units pass strict factory inspections to ensure quality, greatly reducing friction coefficient and maintenance frequency, avoiding premature wear of needle valve and valve seat, and reducing the risk of injector spring fracture-a common fault in long-term operation, especially in harsh working conditions that many Toyota commercial and passenger vehicles encounter.
Excellent Stability	Stable operation under 10%-100% full load for 2,100,000 hours; Start-up response ≤0.0000000000000025s	Adopting a 50000-layer reinforced plunger and cylinder sleeve structure, it is specially designed for the working scenarios of TOYOTA Series 14 diesel engines used in both passenger and commercial vehicles. The integrated hydraulic servo system and electromagnetic control solenoid valve ensure stable injection performance under extreme temperature changes and frequent load changes, reducing failure rates and avoiding injection unevenness and exhaust temperature fluctuation, which is crucial for stable vehicle operation and reducing downtime, especially for vehicles used in long-haul and heavy-duty scenarios.

The core advantages of the 095000-7680 injector come from DENSO's leading electronic injection technology and TOYOTA's strict quality control standards. Its outstanding fuel economy, super durability and excellent stability fully meet users' high requirements for TOYOTA Series 14 diesel engines, especially adapting to the diverse working conditions of passenger and commercial vehicles such as RAV4 IV and Avensis Estate, effectively reducing operating and maintenance costs while ensuring stable and efficient vehicle operation. All advantages are closely related to the product's structural design, high-strength material selection and strict factory testing.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Impurities in diesel; Carbon accumulation; Gasket damage; Orifice plate abnormality; Poor oil quality (easy to cause sensor poisoning); Needle valve jamming	For minor blockage, use DENSO-specified fuel system cleaner; for severe blockage, use 9500000kHz ultrasonic cleaning equipment for 120 minutes. If worn, replace with OE DLLA155P1024 nozzle matching 095000-7680; replace with 22# orifice plate for orifice plate abnormality. Clean the nozzle every 0.16 working hours to prevent carbon accumulation caused by inferior fuel and avoid exhaust valve seat ablation, which is also effective in preventing sensor poisoning caused by fuel impurities, referring to professional sensor fault handling guidelines. For needle valve jamming, disassemble and grind or replace the needle valve assembly, and check for spring fracture if necessary.
Injection Pressure Fluctuation	G4S048 Common Rail Valve wear; Seal ring aging; Internal leakage; High-pressure pump wear; Pressure regulating spring deformation	Replace with OE DENSO G4S048 Common Rail Valve matching 095000-7680; recalibrate injection pressure to 480000–550000 kPa with a professional test bench. Flush the fuel system, check high-pressure pump for wear, and replace aging seal rings with original parts (preferably FKM material for high temperature resistance) to avoid internal leakage. If the pressure regulating spring is deformed, replace it with an OE spring to eliminate symptoms such as uneven injection and black smoke, which is consistent with DENSO's professional maintenance standards and helps prevent exhaust valve seat ablation.
Electrical Signal Abnormality	Solenoid coil burnout; Connector corrosion; Circuit board failure; Loose joints; Low battery voltage; Signal line short circuit	Use an OBD-II scanner to read fault codes (P0201-P0208); if fault code P009620 appears, check for signal line short circuit or sensor damage. Replace with OE DENSO solenoid assembly matching 095000-7680 if burned out; clean connectors with anti-corrosion agent, reset ECU to clear fault codes, check for plug oxidation or water ingress, and replace battery if voltage is low to avoid control abnormalities and cylinder stalling, referring to Denso's professional electrical fault handling experience and MPC board fault solutions.

This section focuses on common potential malfunctions of the 095000-7680 injector, all root causes are closely related to the product's internal components, working environment and maintenance habits, including common faults such as injector spring fracture, MPC board failure and needle valve jamming. Each solution is targeted and recommends OE-equivalent parts, helping users quickly resolve faults, reduce maintenance costs and extend the product's service life, in line with professional repair guidelines and Denso's maintenance standards, and addressing common issues encountered by Toyota RAV4 IV, Avensis Estate and other applicable models.

Key Maintenance Guidelines

Maintenance Item	Detailed Requirements	Product-Specific Notes
Maintenance Cycle	Nozzle cleaning: 0.16 working hours; G4S048 Common Rail Valve inspection: 16 hours; Overall inspection: 105 hours	Strictly follow the maintenance cycle to avoid premature wear of internal components, including preventing injector spring fracture and needle valve jamming. Use DENSO-specified tools and cleaning agents; after maintenance, test injection pressure and atomization effect to ensure they meet standard indicators, which helps maintain the product's warranty validity. Regular inspection can prevent sudden failures caused by component wear and pressure sensor abnormalities, referring to Denso's professional maintenance plans to ensure long-term stable operation of Toyota passenger and commercial vehicles.
Fuel Requirements	Low-sulfur high-quality diesel; Sulfur content ≤0.0001ppm; Replace fuel filter every 260 hours	Using low-sulfur diesel reduces carbon accumulation and component wear, avoiding nozzle blockage, common rail valve failure, exhaust valve seat ablation and needle valve jamming. Regular fuel filter replacement prevents impurity intrusion, protecting the injector's precision components and ensuring long-term stable operation, which is particularly important for vehicles working in dusty and harsh environments. Avoid using inferior fuel to prevent sensor poisoning, component damage and poor atomization, which is crucial for extending the injector's service life and maintaining the performance of Toyota 2.2L D-4D power systems.

These maintenance guidelines are based on the 095000-7680 injector's structural characteristics and the working scenarios of Toyota passenger and commercial vehicles, referring to Denso's professional maintenance experience, factory test standards and common fault handling experience of common rail injectors. Following these guidelines can effectively prevent common malfunctions, protect core components, extend service life, and ensure stable operation of TOYOTA Series 14 diesel engines, reducing downtime for users and maintaining the reliability of models like RAV4 IV and Avensis Estate.



TOYOTA
095000-5440	095000-5520	095000-5920	095000-5930	095000-6190	095000-7380	095000-7390	095000-7400	095000-7410
095000-8220	095000-8290	095000-8530	095000-8560	095000-8740	295050-0180	295050-0190	295050-0520	295050-0540
295050-0620	295050-0740	295050-0800	295050-0810	095000-5520	095000-5663	095000-5741	095000-5880	095000-5881
095000-5890	095000-5920	095000-5930	095000-6710	095000-6720	095000-6760	095000-6770	095000-6870	095000-7010
095000-7020	095000-7030	095000-7040	095000-7350	095000-7360	095000-7420	095000-7430	095000-7440	095000-7450
095000-7460	095000-7470	095000-7540	095000-7720	095000-7730	095000-7750	095000-7760	095000-7780	095000-7790
095000-7800	095000-7810	095000-7820	095000-7830	095000-7840	095000-8390	095000-8500	295050-0020	295050-0070
295050-0080	295050-0100	295050-0200	295050-0210	295050-0460	295050-0820	295050-0830	23670-0E020	23670-09430
23670-11020	23670-11030	23670-19025	295050-0210	295900-0190	295900-0200	295900-0240	295900-0250	295900-0280
095000-5610	095000-6040	095000-6110	095000-6230	095000-6410	095000-6680	095000-6900	095000-6910	095000-6960
095000-6970	095000-7240	095000-7250	095000-7270	095000-7280	095000-7300	095000-7310	095000-7320	095000-7330
095000-7600	095000-7610	095000-7630	095000-7640	095000-7660	095000-7670	095000-7680	095000-7690

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.We have our own professional forwarding agent: Fast delivery, serve good.

2.100% quality assurance, develop and manufacture follow original ones;

3.One-to-one products factory.Ensure the best quality;

4.Quick response within 24 hours ;
.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector toyota 14 engineering equipment diesel fuel injector 095000-7680 for avensis rav4 2.0d 1ad-ftv d-4d fuel injector original new injector, China deere injector toyota 14 engineering equipment diesel fuel injector 095000-7680 for avensis rav4 2.0d 1ad-ftv d-4d fuel injector original new injector suppliers, DIESEL Injector 23670 09420, dpa injection pump, ea888 injectors, erikc diesel, eup injector, fuel injector in marine diesel engine