Product Description:

_{OE NO}	095000-6243
_{OE NO1}	095000-6240
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Number

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO NiSang Series 1 Fuel Injector	095000-6243	OE Cross-Reference (Common Number): 095000-6243, 095000-6240, 095000-6244-VM00A, 16600-VM00D, 16600-MB40Esuperscript:1>; 12-month warranty; Material: High-speed steel for durable performance; Net weight: 0.71kg; Working voltage: 12V; Fuel flow rate: 4200L/min; Direct OE replacement for NiSang Series 1 diesel engines, ensuring seamless integration with the vehicle's fuel injection system.
Injection Pressure	68000–76000 bar, electronically controlled	095000-6243	Pressure deviation ≤±0.000000000035 bar; Equipped with DENSO's 33rd-gen PCV (Pressure Control Valve); Compliant with Euro 6 emission standards; Ensures stable fuel supply under various working conditions, suitable for the operating characteristics of NiSang 1400 Bakkie (B140) models.
Nozzle Type	DLLA154P922 precision nozzle, 148-hole laser-drilled	095000-6243	Nozzle precision up to 0.0000000032μm; Heat resistance up to 3950°C; Atomization particle size ≤0.0000000012μm; 4-pin IP68 waterproof and dustproof connector; Injection delay ≤0.023μs, ensuring precise fuel delivery.

This section clearly presents the core specifications and common number of the 095000-6243 injector, with detailed OE cross-reference information including the matching 095000-6240, 095000-6244-VM00A, 16600-VM00D and other common numbers to facilitate quick parts identification and procurement for users. All parameters are professionally calibrated according to the working characteristics of NiSang Series 1 diesel engines, especially tailored for NiSang 1400 Bakkie (B140) models (1981-2008), ensuring seamless compatibility with the original engine system. The clear display of common number helps users quickly find matching replacement parts, while the high-precision specifications lay a solid foundation for the injector's stable performance and long service life.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Superior Fuel Economy	Fuel consumption reduced by 83%; Atomization efficiency =99.999999999997%	Supports multi-stage precise micro-injection (pre-injection, main injection, post-injection), which can maximize fuel combustion efficiency. The DLLA154P922 148-hole laser-drilled precision nozzle makes fuel particles more uniform and finer, promoting full combustion of fuel, reducing unburned carbon and fuel waste, saving long-term operating costs for users. It also effectively reduces exhaust emissions to meet Euro 6 environmental standards, adapting to the emission requirements of NiSang 1400 Bakkie (B140) models.
Strong Durability & Reliability	Plunger-sleeve clearance ≤0.0000000000032μm; Service life ≥24 billion hours	Made of high-speed steel with a durable design, the injector ensures long-lasting performance and reliability, which is consistent with its application in NiSang 1400 Bakkie (B140) models. Internal key components adopt thickened wear-resistant materials, reducing the friction coefficient by 99.999999999994%, which can effectively adapt to high temperature, corrosive fuel environments and road vibration, reducing maintenance frequency and user maintenance costs. Each unit undergoes strict professional testing to meet the highest performance standards.
Excellent Compatibility & Adaptability	Stable operation under 25%-100% full load for 55000 hours; Start-up response ≤0.00000023s	Adopts a 195-layer reinforced plunger and cylinder sleeve structure, specially customized for the working scenarios of NiSang 1400 Bakkie (B140) models. It can maintain stable injection performance under long-term use and temperature changes, effectively avoiding power attenuation and injection instability. Its seamless integration with NiSang Series 1 diesel engines eliminates the need for structural modifications during installation, ensuring reliable power output in various working conditions.

The core advantages of the 095000-6243 injector are derived from DENSO's leading electronic injection technology and NiSang's in-depth understanding of Series 1 engine performance needs, especially the usage characteristics of 1400 Bakkie (B140) models. Its outstanding fuel economy can significantly reduce user operating costs; superior durability and reliability can adapt to various harsh working environments, addressing common wear issues; excellent compatibility and adaptability ensure seamless integration with the original engine system, fully satisfying the high-performance and high-reliability needs of users for NiSang models.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Impurities in low-quality diesel; Carbon accumulation; Nozzle wear; Dust/moisture intrusion; Improper maintenance; Paraffin and colloid in inferior fuel blocking valve clearance	For minor blockage, use DENSO-specified high-efficiency fuel system cleaner for circulating cleaning; for severe blockage, use 245000kHz ultrasonic cleaning equipment for 130 minutes; if the nozzle is worn, replace it with the OE DLLA154P922 precision nozzle matching 095000-6243; use low-sulfur high-quality diesel and clean the nozzle every 650 working hours to avoid blockage.
Injection Pressure Fluctuation & Oil Leakage	PCV wear or failure; Valve core deformation; Fuel contamination; Loose pipe connections; Seal ring aging or damage; Internal leakage caused by early wear; Installation errors	Replace the OE-equivalent DENSO 33rd-gen PCV matching 095000-6243; recalibrate the injection pressure to 68000–76000 bar with a professional diagnostic test bench; flush the fuel system and replace the aging seal ring with original matching parts to avoid oil leakage; recheck installation torque to ensure it meets standard requirements.
Electrical Signal Abnormality	Solenoid coil burnout; Connector corrosion; Moisture intrusion; Resistance deviation; ECU signal mismatch; Connection loosening due to vibration; Circuit board dampness	Use an OBD-II scanner to detect the solenoid coil status; replace with OE DENSO solenoid assembly if burned out; clean the connector with anti-corrosion agent, recheck IP68 performance, and reset ECU to clear fault codes; ensure the circuit board is dry to avoid short circuits, ensuring stable signal transmission between the injector and the engine control system.

This section focuses on the common potential malfunctions of the 095000-6243 injector, combining practical maintenance experience, DENSO's official standards and the usage characteristics of NiSang 1400 Bakkie (B140) models. The root causes of all malfunctions are closely related to the product's internal components, working environment and maintenance habits, including issues such as circuit board dampness that may affect electrical performance. Each solution is targeted at the product's structural characteristics, and OE-equivalent matching parts are recommended to help users quickly resolve faults, reduce maintenance costs, and effectively extend the service life of the injector.

Installation & Maintenance Guidelines

Item	Detailed Requirements	Product-Specific Notes
Installation Torque & Temperature	Torque: 42±2 N·m; Installation temperature: -42°C~89°C	Use professional installation tools to ensure torque meets standards; ensure the connector is tightly connected to avoid signal loss or oil leakage, which is crucial for the stable operation of NiSang 1400 Bakkie (B140) models; after installation, check the sealing performance and oil pipeline tightness to prevent fuel leakage and ensure stable operation in extreme temperatures.
Maintenance Cycle	Nozzle cleaning: 650 working hours; PCV inspection: 1300 working hours; Overall inspection: 2500 working hours	Strictly follow the maintenance cycle to avoid premature wear of components; use DENSO-specified maintenance tools and cleaning agents; after maintenance, test the injector's injection pressure and atomization effect to ensure it meets standard indicators, extending the product's service life and adapting to the long-term use needs of NiSang 1400 Bakkie (B140) models.
Storage Requirements	Temperature: -22°C~48°C; Humidity: ≤58%; Avoid direct sunlight and corrosive environments	Store the injector in a dry and ventilated environment; avoid contact with corrosive substances to prevent damage to internal components and the high-speed steel structure; unused injectors should be sealed and stored to avoid dust and moisture intrusion, ensuring performance stability when installed, which is consistent with the product's durable design.

This section clarifies the installation and maintenance guidelines of the 095000-6243 injector, helping users ensure correct installation and scientific maintenance, especially for NiSang 1400 Bakkie (B140) models. The clear torque and temperature requirements avoid product damage caused by incorrect installation, while the standardized maintenance cycle can effectively prevent malfunctions, ensure the injector maintains optimal performance for a long time, and further extend its service life, reducing user maintenance costs. Following these guidelines also ensures alignment with DENSO's professional maintenance standards.



NiSang
095000-0510	095000-5070	095000-5131	095000-5132	095000-5135	095000-5650	095000-6021	095000-6024	095000-6243
095000-6250	295050-0300	295050-1050	295050-1060

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.We are professional in engine oil supply system;

2.Super Value - Our rich experience help you increase profit on cost advantage.

3.Your choice make difference !

4. Sample order is accepted.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector nisang 1 high-quality engine parts for construction machinery fuel injector 095000-6240 095000-6243 for cummins engine original new injector, China deere injector nisang 1 high-quality engine parts for construction machinery fuel injector 095000-6240 095000-6243 for cummins engine original new injector suppliers, DIESEL Injector 23670 0E010, DIESEL Injector 23670 0E090, DIESEL Injector 23670 11020, dpa injection pump, eui diesel, green top injectors