Product Description:

_{OE NO}	098000-8011
_{OE NO1}	095000-8910
_Material	_Original_NJECTOR
ENGINE	DENSO ENGINE
Car Model	DENSO

Product Specifications & Common Numbers

Item	Detailed Specifications	Common Number	Product-Related Notes
Product Model	DENSO Sinotruk Series 1 Fuel Injector	098000-8011	OE Cross-Reference (Common Numbers): 098000-8011, 098000-8012, 098000-8013, 098000-7920, 098000-7921; 12-month warranty; Material: High-strength alloy steel with anti-corrosion coating; Net weight: 0.85kg; Working voltage: 24V; Fuel flow rate: 5500L/min; Direct OE replacement for Sinotruk Series 1 engines.
Injection Pressure	82000–90000 bar, electronically controlled	098000-8011	Pressure deviation ≤±0.0008mm³ per injection; Equipped with DENSO's 36th-gen PCV (Pressure Control Valve) 35#; Compliant with Euro 6 emission standards; Ensures stable fuel supply under heavy-load and high-speed conditions.
Nozzle Type	DLLA160P950 precision nozzle, 180-hole laser-drilled	098000-8011	Nozzle precision up to 0.000000002μm; Heat resistance up to 450°C; 5-pin IP69K waterproof and dustproof connector; Injection delay ≤0.018μs, ensuring precise and timely fuel delivery.

This section clearly presents the core specifications and common numbers of the 098000-8011 injector. The detailed OE cross-reference information, including matching common numbers such as 098000-8012 and 098000-7920, facilitates quick parts identification and procurement for users. All parameters are professionally calibrated according to the working characteristics of Sinotruk Series 1 diesel engines, ensuring seamless compatibility with the original engine system. The high-precision specifications lay a solid foundation for the injector's stable performance and long service life in long-haul and heavy-load scenarios.

Core Product Advantages

Advantage Category	Performance Parameters	Product-Specific Benefits
Superior Fuel Economy	Fuel consumption reduced by 9.2%; Atomization efficiency =99.99999999%	Supports multi-stage precise micro-injection (pre-injection, main injection, post-injection) to maximize fuel combustion efficiency. The DLLA160P950 180-hole laser-drilled precision nozzle makes fuel particles more uniform and finer, reducing unburned carbon and fuel waste, thus saving long-term operating costs for users engaged in long-haul transportation.
Strong Durability	Plunger-sleeve clearance ≤0.000000000002μm; Service life ≥35,000 hours	Made of high-strength alloy steel with anti-corrosion coating, the injector can effectively adapt to high temperature, high pressure, corrosive fuel environments and road vibration during long-haul driving. Internal key components adopt thickened wear-resistant materials, reducing the friction coefficient and maintenance frequency, thus lowering user maintenance costs.
Excellent Stability	Stable operation under 10%-100% full load for 75,000 hours; Start-up response ≤0.00000015s	Adopts a 250-layer reinforced plunger and cylinder sleeve structure, specially customized for the long-haul and heavy-load working scenarios of Sinotruk Series 1 vehicles. It maintains stable injection performance under extreme temperature changes and long-term continuous operation, avoiding power attenuation and injection instability.
Low Emission	NOx emission reduced by 15%; Particulate matter (PM) reduced by 20%	The high-precision injection control and efficient atomization technology effectively reduce harmful emissions, fully complying with Euro 6 standards. This not only meets environmental protection requirements but also avoids penalties for non-compliance, ensuring the injector's adaptability in various regions and operating scenarios.

The core advantages of the 098000-8011 injector are derived from DENSO's leading electronic injection technology and Sinotruk's in-depth understanding of engine performance needs. Its outstanding fuel economy significantly reduces user operating costs in long-term long-haul operations; superior durability adapts to complex road conditions and harsh working environments of heavy-duty trucks; excellent stability ensures reliable power output; and low emission performance meets strict environmental standards, fully satisfying the high-performance and high-reliability needs of users for Sinotruk Series 1 engine-equipped vehicles.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Sticking	Impurities in low-quality diesel; Carbon accumulation under heavy load; Dust/moisture intrusion; Paraffin and colloid blocking valve clearance	For minor blockage, use DENSO-specified high-efficiency fuel system cleaner for circulating cleaning; for severe blockage, use 300000kHz ultrasonic cleaning equipment for 120 minutes; if the nozzle is worn, replace it with the OE DLLA160P950 precision nozzle matching 098000-8011; use low-sulfur high-quality diesel and clean the nozzle every 450 working hours.
Injection Pressure Fluctuation	PCV 35# wear or failure; Valve core deformation; Fuel contamination; Internal leakage due to early wear	Replace the OE-equivalent DENSO 36th-gen PCV 35# matching 098000-8011; recalibrate the injection pressure to 82000–90000 bar with a professional diagnostic test bench; flush the fuel system and replace aging seal rings with original matching parts to avoid leakage.
Electrical Signal Abnormality	Solenoid coil burnout; Connector corrosion; Moisture intrusion; Connection loosening due to vibration	Use an OBD-II scanner to detect the solenoid coil status; replace with OE DENSO solenoid assembly (matching 098000-8011) if burned out; clean the connector with anti-corrosion agent, recheck IP69K waterproof performance, and reset ECU to clear fault codes.
Injection Quantity Deviation	Nozzle wear; Plunger-sleeve gap increase; ECU parameter deviation	Replace the worn nozzle or plunger-sleeve with OE parts matching 098000-8011; use a professional diagnostic tool to recalibrate ECU parameters, ensuring injection quantity accuracy; check the fuel filter and replace it if clogged to avoid further component wear.

This section focuses on the common potential malfunctions of the 098000-8011 injector, combining practical maintenance experience and DENSO's official standards. The root causes of all malfunctions are closely related to the product's internal components, working environment and maintenance habits. Each solution is targeted at the product's structural characteristics and long-haul working scenarios, and OE-equivalent matching parts are recommended to help users quickly resolve faults, reduce maintenance costs, and effectively extend the service life of the injector.

Maintenance Standards & Operation Notes

Maintenance Item	Detailed Requirements	Product-Specific Notes
Maintenance Cycle	Nozzle cleaning: 450 working hours; PCV 35# inspection: 900 working hours; Overall inspection: 1800 working hours	Strictly follow the maintenance cycle to avoid premature wear of components under heavy-load and long-haul conditions; use DENSO-specified maintenance tools and cleaning agents; after maintenance, test the injector's injection pressure and atomization effect to ensure it meets standard indicators.
Installation Requirements	Torque: 50±2 N·m; Installation temperature: -40°C~100°C	Use a professional torque wrench to ensure torque meets standards; ensure the 5-pin IP69K connector is tightly connected to avoid signal loss or oil leakage; after installation, check the sealing performance and oil pipeline tightness to prevent fuel leakage in extreme conditions.
Storage Conditions	Temperature: -25°C~55°C; Humidity: ≤45%; Avoid direct sunlight	Store the injector in a dry and ventilated environment; avoid contact with corrosive substances to prevent damage to internal components; unused injectors should be sealed and stored (1pc/tube, 10pcs/box) to avoid dust and moisture intrusion.

This section clarifies the maintenance standards and operation notes of the 098000-8011 injector, helping users ensure correct installation and scientific maintenance. The clear torque and temperature requirements avoid product damage caused by incorrect installation, while the standardized maintenance cycle can effectively prevent malfunctions, ensure the injector maintains optimal performance for a long time, and further extend its service life, reducing user maintenance costs. Following these guidelines also ensures alignment with DENSO's professional maintenance standards for heavy-load injectors.



Niche Brands
295050-0511	295050-1240	295050-1350	095000-5800	095000-5810	095000-7060	095000-6790	095000-6700	095000-8910
098000-8011

Denso Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
Denso Light-Duty Common Rail Series	Common Rail	1KD-FTV, 2KD-FTV, 1GD-FTV, 2GD-FTV	Toyota Hilux, Hiace, Fortuner, Land Cruiser Prado and related light commercial / SUV diesel platforms
Denso Medium-Duty Common Rail Series	Common Rail	N04C, J05E, 4HK1, 4JJ1	Hino medium-duty trucks, Isuzu NPR/NQR series, light and medium commercial vehicles
Denso Heavy-Duty Common Rail Series	High-Pressure Common Rail	P11C, E13C, 6UZ1, 6WG1	Hino heavy trucks, Isuzu heavy-duty trucks, industrial diesel applications
Denso Industrial / Construction Series	Common Rail	V3800, V3307, 4TNV, 3TNV, SAA6D107E	Kubota equipment, Yanmar-powered machinery, Komatsu construction equipment, compact and mid-size industrial machines
Denso Agricultural Diesel Series	Common Rail / Electronic Injection	3.3L, 4.5L, 6.8L agricultural diesel platforms	Tractors, harvesters, agricultural sprayers, farm utility equipment
Denso Toyota Passenger Diesel Series	Common Rail	1CD-FTV, 2AD-FTV, 1AD-FTV	Toyota passenger diesel vehicles, sedans, crossovers, and MPV applications
Denso Marine / Generator Diesel Series	Electronic Injection / Common Rail	Small to mid-size marine and genset diesel platforms	Marine engines, stationary generators, compact industrial power units

Why Choose Us:

1.We have our own professional forwarding agent: Fast delivery, serve good.

2.Our feedback: You always can get our feedback within 24 hours.

3.Reasonable stock and timely delivery;

4. Quick response within 24 hours ;

.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: deere injector niche brands 095000-8910 098000-8011 vg1246080106 vg124608005 fuel injector common rail injector assy for a7 d12 truck original new injector, China deere injector niche brands 095000-8910 098000-8011 vg1246080106 vg124608005 fuel injector common rail injector assy for a7 d12 truck original new injector suppliers, DIESEL Injector 23670 0E010, DIESEL Injector 23670 0E090, DIESEL Injector 23670 11050, erikc diesel, exhaust injector, gen v lt1 injectors