Caterpillar Injector C9 Excavator Part 387-9438 387-9432 387-9433 For Cat 336D 330D C9 Engine Common Rail Fuel Injector 557-7633 254-4340 Original New Injector

Send Inquiry
Caterpillar Injector C9 Excavator Part 387-9438 387-9432 387-9433 For Cat 336D 330D C9 Engine Common Rail Fuel Injector 557-7633 254-4340 Original New Injector
Details
The c-aterpillar 387-9438 fuel injector is a high-reliability OEM-compatible component specifically developed for c-aterpillar C9 series diesel engines, with cross-reference part numbers 3879438, CA3879438 and 10R-7242. As a critical core component of the C9 engine’s fuel injection system, it adopts the advanced HEUI (Hydraulically Actuated Electronically Controlled Unit Injection) technology—the core design of c-aterpillar C9 fuel delivery systems. This integrated technology combines hydraulic drive and electronic control to achieve ultra-precise fuel metering and timing adjustment, perfectly matching the C9 engine’s 8.8-liter displacement and 250-450 horsepower output characteristics. Manufactured in strict compliance with c-aterpillar’s original design standards, ISO 9001 certific-ation requirements, and rigorous multi-stage quality control processes, this injector serves as a dependable direct replacement for the original C9 engine fuel injection unit, ensuring seamless plug-and-play installation without any modific-ations to the engine or fuel system. As a new aftermarket part produced by professional manufacturers specializing in diesel fuel injection components, it is engineered to withstand the harsh operating conditions of construction sites, mining operations, industrial generator sets, and other heavy-duty scenarios where C9-powered equipment is widely utilized. Equipped with precision-machined 7-hole nozzles for superior fuel atomization (with droplet size as fine as 4.2μm), a high-strength heat-treated alloy steel body, and a wear-resistant anti-corrosion coating, it delivers stable 24V operation, accurate fuel atomization, and consistent injection performance—all crucial for optimizing engine combustion efficiency, boosting power output, and reducing harmful emissions to meet EU Stage V equivalent emission standards. Each unit undergoes 100% factory bench testing, including electrical performance verific-ation, pressure resistance testing (adapting to the C9 engine’s 2400bar injection pressure), spray pattern detection (meeting ISO 4010 standards with spray cone angle deviation within ±2°), and strict sealing inspection, as well as comprehensive quality checks to guarantee long-term reliable operation. It effectively resolves common engine issues such as misfires, power loss, and excessive fuel consumption caused by poor atomization or injector failure, and boasts excellent wear and corrosion resistance to ensure an extended service life under heavy-duty working conditions. With in-stock availability (up to 280 units in stock), flexible MOQ (1 piece for small orders, batch discounts available), 12-month quality warranty, fast global delivery (3-7 working days, 5 days delivery from Shiyan, Hubei), and neutral packaging suitable for cross-border export, the 387-9438 injector is widely applicable to various C9-powered heavy equipment, fully meeting the needs of global aftermarket and export customers. It is perfectly matched with C9 engine-powered excavators, loaders, industrial generators, and other construction machinery, providing stable and efficient performance support for equipment operation.
Category
CAT Diesel Injector
Share to
Description

Product Description:

OE NO 387-9438
OE NO1 387-9432
Material Original new CAT INJECTOR
ENGINE CAT engine
Car Model CAT

1. Core Basic Specific-ations

Parameter Item

Specific-ation Details

Part Number

387-9438 (3879438, CA3879438, 10R-7242)

Engine Compatibility

c-aterpillar C9 Series Diesel Engines (8.8L displacement, 250-450HP); Compatible with C9-powered construction and industrial equipment

Injection System

HEUI System; Common Rail; Electronically Controlled Electromagnetic Injector (adapting to 2400bar injection pressure); 7-hole nozzle design

Fitment Style

Direct OEM Replacement, Plug-and-Play (No Modific-ations Required); Professional Installation with Dedic-ated Tools (e.g., ERIKCE1024003) Recommended

Quality Standard

c-aterpillar OEM Standard; ISO 9001 Certified; 100% Bench-Tested Before Shipping; Strict Quality Inspections

Condition & Warranty

New Aftermarket; 12-Month Quality Warranty; MOQ: 1 Piece (Batch Discounts Available); Origin: China; In-stock Quantity: Up to 280 Units

Physical Data

Package Size: 37×31×16 cm; Net Weight: 1.82 kg; Gross Weight: 2.02 kg; Neutral Packaging for Export; Delivery from Shiyan, Hubei

Key Parameters

Fuel Type: Diesel; Operating Voltage: 24V; Material: Heat-Treated Alloy Steel with Anti-Corrosion Coating; Resistance: 15-18Ω (High Resistance Type); Spray Droplet Size: 4.2μm; Nozzle Hole Quantity: 7

2. Compatible Equipment & Applic-ations

Applic-ation Field

Typical Applicable Equipment

Heavy Construction Excavators

c-aterpillar 320C, 320D, 320DL, 330C, 330D, 336D Series Excavators

Crawler Loaders & Graders

c-aterpillar 973C Crawler Loader, 140M, 160M, 120 Motor Graders

Industrial Generators

c-aterpillar C9-Powered GEN SET, D250GC, D300GC, XQP300 Generators

Heavy-Duty Construction Equipment

814F II Wheeled Bulldozer, 815F II/816F II Earthwork Compactor, 627G/637G Scrapers

3. Performance & Quality Advantages

Key Performance Metric

Core Benefit

Injection Precision

HEUI System and 7-hole Precision-Machined Nozzles Ensure Accurate Fuel Delivery (error ≤±0.6%) and Timing, Matching C9 Engine's Real-Time Demand for Optimal Combustion; Spray Cone Angle Deviation Within ±2% (ISO 4010); Valve needle diameter meets standard 3.00±0.002mm

Fuel Efficiency

Optimal Fuel Atomization (4.2μm Droplet Size) Promotes Complete Combustion, Improving Fuel Economy by 30% and Reducing Long-Term Operating Costs for Equipment; Compatible with C9 engine's fuel efficiency optimization design

Durability

Heat-Treated Alloy Steel Body and Anti-Corrosion Coating Enhance Wear and Corrosion Resistance, Ensuring Long Service Life (up to 460,000 km) in Harsh Environments, matching the C9 engine's 15,000-hour B10 life and 30,000-hour overhaul cycle

Supply & Service

In-Stock Availability (up to 280 units), Flexible MOQ, 12-Month Warranty, Fast Global Delivery (3-7 Days, 5 days from Shiyan), Neutral Packaging for Cross-Border Export; Supported by Professional After-Sales Technical Service

4. Installation & Maintenance Tips

Item

Details

Installation

Disconnect the battery negative pole and release fuel line pressure before installation; thoroughly clean the fuel system and injector interface according to standard installation procedures; use dedic-ated tools to avoid component damage; replace seals and copper washers; torque to c-aterpillar OEM specific-ations (30-35N・m); verify part number compatibility; professional installation is recommended to ensure performance.

Maintenance Interval

Inspect injector performance every 6,000–10,000 operating hours (consistent with C9 engine maintenance cycle); replace fuel filters every 200 hours or 5,000 km; check electrical connections and coil performance periodically; clean 7-hole nozzles with ultrasonic cleaner if clogged (use 0.23mm diameter copper wire for stubborn impurities, avoid steel wire) to maintain atomization quality.

Storage

Store in a dry, clean and well-ventilated area (-15℃ to 45℃); package with anti-rust materials and sealed plastic bags; avoid dust, moisture, extreme temperature and physical damage to the nozzle; protect the 7-hole nozzle from blockage.

Troubleshooting

Check for 7-hole nozzle clogging, fuel pressure leakage or poor electrical contact if the engine misfires, loses power or has excessive fuel consumption; use KTS diagnostic tools to read fault codes (e.g., 3-6 for high injector current) for accurate troubleshooting; measure valve needle diameter with high-precision gauge if performance declines (replace if worn beyond standard); confirm C9 engine compatibility; refer to c-aterpillar official service manual for professional maintenance.

C9

10R-2828

10R-4764

10R-47641

10R-4844

10R-7221

10R-7222

10R-7223

10R-9002

10R-9003

11R-1582

20R-1259

20R-1917

20R-8060

20R-8061

20R-8062

20R-8063

20R-8064

20R-8065

20R-8068

20R-8069

20R-8427

20R-8846

20R-8968

20R-9433

225-0117

235-5261

236-0957

238-8092

240-8063

242-0857

245-3516

254-4330

254-4339

254-4340

258-8745

265-8106

266-4446

267-3360

267-3361

267-9710

267-9717

267-9722

267-9734

293-4067

293-4071

293-4072

293-4073

293-4074

320-2940

328-2573

328-2574

328-2576

328-2577

328-2578

328-2580

387-9431

387-9432

387-9433

387-9434

387-9435

387-9436

387-9437

387-9438

387-9439

387-9484

459-8473

53L-8062

553-2592

557-7633

557-7634

557-7637

573-4231

573-4235

577-7633

 

               

caterpillar Fuel Injector Series - Engine - Equipment Appliccccation Table

 

 
Fuel Injector / Engine Series Common Injection Technology Corresponding Engine Platform Common ccccat Models / Equipment Platforms
3116 Series Mechanical Injection / Early Electronic Platform 3116, 3116T, 3116TA, 3116DIT M318, M320 Wheel Excavators; 135H Motor Grader; D6M Dozer
3126 / 3126B Series HEUI 3126, 3126B 120H Motor Grader; 950G Series II Wheel Loader; 950G Platform
3126E Series HEUI 3126E Commonly used in medium-duty construction and industrial platforms similar to the 3126 appliccccation range
C6.4 Series ACERT Injection Platform C6.4 ACERT 320D / 320D L; 323D L / LN; 320D LRR; 320D FM
C6.6 Series ACERT Injection Platform C6.6 ACERT 320D / 320D L (C6.6 versions); 320E LN; 323E LN
C7 Series HEUI C7, C7 ACERT 120K Motor Grader; 950H Wheel Loader
C7.1 Series Common Rail / Later Electronic Injection C7.1, C7.1 ACERT 320D2 / D2 L, 326D2, 330D2 Excavators; 950K, 950, 962, 930M Wheel Loaders; Generator Sets
C9 Series HEUI-B C9, C9 ACERT 330D / 330D L / 330D MH; construction and industrial platforms
C10 Series Electronic Unit Injection Family C10 140H, 143H, 160H, 163H, 14H, 16H Motor Graders; 814F Wheel Dozer; 815F Compactor; 816F Landfill Compactor; 966G II, 972G II Wheel Loaders; D7R II Dozer; 725 / 730 Articulated Trucks; R1600G, R1700G LHD; W345B II Wheel Excavator; 345B / 365B Excavators
C12 Series Electronic Unit Injection C12, C12 Marine Widely used across 140H, 143H, 160H, 163H, 14H, 16H; 966G II, 972G II; D7R II; 725 / 730; W345B II; 345B / 365B; also widely used in marine appliccccations
C13 Series MEUI C13, C13 ACERT 345D L Excavator; 730C EJ Articulated Dump Truck; Generator Sets; Industrial Power Platforms
C15 Series MEUI C15, C15 ACERT 770 Off-Highway Truck; 374D L / 374F L Excavators; 365C Demolition Excavator; R3000H LHD; Industrial Power and Generator Sets
3406E Series EUI 3406E AD30 Underground Mining Truck; 16H Motor Grader; 824G Series II Wheel Dozer; 826G Series II Landfill Compactor
C18 Series15 EUI / Later Electronic Injection Platform C18, C18 ACERT Generator Sets; Marine Appliccccations; Large Industrial and Mining Platforms
202603-TD2-CAT

Why Choose Us:

1 .Your choice make difference !

2. We are professional in engine oil supply system;

3 .Support ordering samples;

4.The product has undergone a rigorous testing process, and we provide high-quality products;

1

2

 

3

 4

Contact Detail:
ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 13790195672 Whatsapp::+86 13790195672
Email:edwardswilliam1988@gmail.com

 

 

 

 

Hot Tags: caterpillar injector c9 excavator part 387-9438 387-9432 387-9433 for cat 336d 330d c9 engine common rail fuel injector 557-7633 254-4340 original new injector, China caterpillar injector c9 excavator part 387-9438 387-9432 387-9433 for cat 336d 330d c9 engine common rail fuel injector 557-7633 254-4340 original new injector suppliers, C4 4 Injector 370 7286, Diesel Engine Fuel Injection System 263 8218, injection system purge, injector motocultor diesel, premco injectors, unit pump injection system

Send Inquiry