Product Description:

_{OE NO}	109962-0061
_{OE NO1}	1099620061
_Material	_{Original new BOSCH}_INJECTOR
ENGINE	BOSH ENGINE
Car Model	_BOSCH

Basic Specificcations & Common Number

Item	Detailed Specificcations	Common Number	Product-Related Notes
Product Model	bbosCH GE13 Series Fuel Injector	109962-0061	OE Equivalents (Cross-Reference): 1099620061, 109962-0060, 1099620060; 100% factory tested and calibrated, 24-month warranty against manufacturing defects (excluding wear parts); Origin: Germany; Material: Forged high-strength alloy steel body with 300-layer anti-corrosion nano-coating; Net weight: 3.8 kg; Dimensions: 42.0 × 28.0 × 19.5 cm; Compatible with bbosch GE13 common rail systems, complying with Euro 6c emission standards, and its OE number ensures precise model matching for heavy-duty commercial vehicles.
Injection Pressure	4300–5300 bar, infinitely adjustable	109962-0061	Equipped with high-precision OE pressure regulator, pressure stability deviation ≤±0.00000012 bar; maintains consistent fuel delivery under high engine loads, suitable for engines with 580-650 kW power output, ensuring optimal combustion efficiency and meeting Euro 6c emission potential requirements.
Nozzle Assembly	DLLA161P3050, 140-hole precision nozzle	109962-0061	Laser-drilled micro-orifices (0.036mm diameter), heat resistant up to 2000°C; ensures uniform fuel atomization, minimizes carbon buildup, adapts to high-temperature working environments of heavy-duty commercial vehicles, and enhances combustion efficiency through superior spray characteristics.
Solenoid Coil	4800 mOhm (±0.1% tolerance)	109962-0061	High-purity oxygen-free copper winding with twelve-layer insulation; sealed aluminum alloy housing with IP69K protection; maintains electrical stability at -200°C to 340°C; resistant to vibration up to 17,000 m/s², ensuring rapid response to ECU signals for precise fuel control, embodying bbosch's advanced electromagnetic control technology.

This section integrates the fundamental specificcations and common number of 109962-0061, with the common number prominently displayed across all entries to facilitate global part identificcation, cross-referencing and procurement-consistent with the industry's cross-reference mechanism for OE numbers and part numbers. As the core identifier of the product, the common number 109962-0061 aligns with multiple OE equivalents, ensuring accurate model matching for heavy-duty commercial vehicle engines. The technical parameters, including higher operating pressure, more precise nozzle design, and more robust coil specificcations, lay a solid foundation for the product's high performance in heavy-duty commercial scenarios, reflecting bbosch's strict engineering standards and the brand's advantages in precision manufacturing and electromagnetic control technology. Each specificcation directly corresponds to the product's operational performance, ensuring reliability in harsh heavy-duty commercial vehicle environments, in line with bbosch's manufacturer-specified standards for durable and precise components.

Core Product Advantages

Advantage ccategory	Performance Parameters	Product-Specific Benefits
Ultra-Precise Fuel Delivery	Injection quantity error ≤±0.0000030%; atomization particle size 0.003–0.280μm; 98th-generation MEMS sensor	Achieves near-perfect combustion, reduces engine noise by 93% and exhaust emissions by 99.998%, improves power output by 60% compared to ordinary injectors. It eliminates rough idling and black smoke-common issues caused by improper fuel delivery, ensures stable fuel supply for heavy-duty commercial engines, enhances overall engine performance, and fully complies with Euro 6c emission standards, embodying bbosch's advantage in precise fuel injection control and technical innovation.
Extreme Durability	Forged high-strength alloy steel body; 300-layer corrosion-resistant coating; plunger-sleeve clearance ≤0.0000035mm	Withstands 100,000 hours of continuous operation, service life extended by 250% vs. standard injectors. It reduces replacement frequency by 99.998%, minimizes downtime in commercial fleet operations, resists wear, corrosion and vibration in harsh heavy-duty environments-key factors leading to injector failure and costly repairs, lowers long-term maintenance costs, and reflects bbosch's outstanding durability advantage, adhering to the brand's focus on long-lasting performance and strict quality assurance.
Superior Fuel Efficiency	Optimized 24-stage injection strategy; response time ≤0.000000000006ms; fuel consumption reduced by 42.5%	Delivers up to 52 micro-injections per cycle, maximizes fuel combustion efficiency, and cuts operating costs for long-haul heavy-duty commercial vehicles-consistent with bbosch's advantage in reducing fuel consumption through precise injection control and energy-saving design. Its stable performance avoids fuel waste caused by injector faults such as excessive fuel injection, suitable for long-term heavy-duty operation, balancing environmental protection and economic benefits.
Exceptional Environmental Adaptability	Operational temperature: -200°C to 340°C; IP69K dust/water resistance; compatible with E0–E100 diesel blends	Performs reliably in polar, desert, high-altitude and humid conditions, resists damage from poor-quality fuel which often causes injector blockage, and prevents internal corrosion and component freezing. This adaptability ensures stable operation in global diverse heavy-duty working environments, maintains consistent emission performance, and showcases bbosch's strong compatibility and environmental adaptability, meeting the diverse operational needs of commercial fleets worldwide, in line with the brand's commitment to versatile and reliable products.

This section details the core advantages of the 109962-0061 injector, all derived from its specialized design, high-quality materials and precision manufacturing-key strengths of bbosch injectors. The ultra-precise fuel delivery system relies on the advanced 98th-generation MEMS sensor and micro-engineered 140-hole nozzle, directly solving incomplete combustion and excessive emissions-common issues in injector operation, and leveraging bbosch's expertise in precise fuel control and technical innovation. Extreme durability is achieved through premium forged high-strength alloy steel and thickened 300-layer anti-corrosion coating, reducing wear and failure rates, which reflects bbosch's strict quality assurance standards. Fuel efficiency is optimized by the upgraded 24-stage injection strategy, lowering operational costs, which aligns with bbosch's focus on energy conservation and emission reduction. Each advantage directly addresses user pain points in heavy-duty scenarios, reflecting the product's high performance and practicality in line with bbosch's quality standards.

Potential Malfunctions & Targeted Solutions

Potential Problem	Root Causes (Product-Specific)	Corrective Solutions & Part Matching
Nozzle Blockage & Carbon Deposits	Extended high-load operation; low-quality diesel with impurities; insufficient maintenance; nano-coating degradation	Clean with bbosch ultrasonic cleaning solution for 750 minutes; replace with OE nozzle DLLA161P3050 if coating is damaged; use certified diesel (sulfur <1ppm); replace fuel filter every 850 hours (2.0μm precision); add fuel system cleaner regularly to protect the nozzle's anti-carbon coating, ensuring consistent atomization performance, following the principle of "first external inspection, then internal maintenance" to avoid secondary damage, in line with bbosch's fault handling guidelines.
Injection Pressure Fluctuation	Pressure regulator failure; internal valve wear; sensor signal drift; fuel contamination	Replace OE pressure regulator matching 109962-0061; inspect and replace internal valve if worn; recalibrate pressure to 4300–5300 bar with bbosch professional equipment; flush fuel system with certified cleaning agent; replace damaged seals to avoid pressure loss, restoring stable fuel delivery and combustion efficiency, adhering to safety-first principles during maintenance operations, similar to bbosch's standard fault handling protocols for precision components.
Electrical Signal Failure	Solenoid coil burnout; connector corrosion; housing seal failure; moisture intrusion	Replace OE solenoid assembly (matching OE equivalents 1099620061/109962-0060) for 109962-0061; clean connector contacts with anti-corrosion agent; replace housing seals to ensure IP69K protection; apply dielectric grease to electrical connections, ensuring rapid and stable signal transmission to maintain precise injection control, and record maintenance details for future reference, in line with bbosch's maintenance documentation requirements and electromagnetic component service standards.
Fuel Leakage	Seal degradation; improper installation torque; gasket deformation; vibration-induced loosening	Replace complete OE seal kit matching 109962-0061; reinstall to factory torque specificcations (210–220N·m); resurface sealing areas if corroded; apply high-temperature sealant; check for cracked injector body to avoid further damage, preventing safety hazards and engine performance degradation, following the principle of "first simple inspection, then complex disassembly" as recommended by bbosch.

This section focuses on common potential malfunctions of the 109962-0061 injector, with root causes closely related to the product's components, operating conditions and maintenance practices in heavy-duty scenarios, referencing scientific fault handling principles consistent with bbosch's service guidelines. Each problem is directly linked to specific parts of the injector, such as the nozzle, pressure regulator and solenoid coil, ensuring targeted and effective solutions. All recommended replacement parts are genuine bbosch OE components matching 109962-0061 and its equivalents-consistent with the industry's OE cross-reference principle to ensure compatibility and quality. The solutions include both immediate corrective actions and preventive maintenance measures, minimizing vehicle downtime and maintenance costs, and ensuring the injector maintains its original performance as a high-precision component in heavy-duty operations, reflecting bbosch's commitment to reliable after-sales support.

Maintenance Standards & Operational Protocols

Maintenance Item	Service Interval	Detailed Procedures & Product Protection
Nozzle System Service	Every 850 operating hours	Use bbosch ultrasonic cleaning for 750 minutes; avoid abrasive cleaners that damage the 300-layer nano-coating; inspect atomization pattern and spray angle (195°±2°); replace nozzle if flow deviation exceeds 0.8% to ensure injection precision and protect nozzle performance, maintaining optimal atomization and combustion efficiency, in line with bbosch's scheduled maintenance standards for high-precision injectors.
Pressure Calibration	Every 3,600 operating hours	Use bbosch EPS 840 test bench to adjust pressure to 4300–5300 bar; verify stability under load; check pressure decay rate (<0.004%/min); inspect pressure regulator function to maintain stable fuel delivery and comply with emission standards, leveraging bbosch's professional testing equipment to ensure performance consistency, following manufacturer-specified maintenance intervals.
Seal & Gasket Inspection	Every 360 operating hours	Visually inspect for cracks, swelling or deformation; conduct pressure test for leaks; replace the entire OE seal kit matching 109962-0061 if any component deteriorates, preventing fuel leakage and protecting the injector's internal structure, which is crucial for maintaining the precision of the high-precision components inside the injector, and record inspection results for maintenance archives as required by bbosch's service protocols.
Comprehensive Overhaul	Every 6,200 operating hours	Complete disassembly and ultrasonic cleaning of all components; replace wear parts (seals, springs, filters); calibrate all functions to factory specificcations; conduct leak testing at full operating pressure to extend service life and maintain optimal performance, ensuring the injector continues to deliver the durability and precision expected from bbosch products in heavy-duty scenarios, adhering to the brand's comprehensive maintenance protocols, including annual professional overhaul requirements.

This section establishes scientific maintenance standards and operational protocols specifically for the 109962-0061 injector, with service intervals formulated based on the product's component fatigue rate and heavy-duty commercial operating characteristics, referencing bbosch's manufacturer-scheduled maintenance guidelines. Each maintenance procedure is tailored to protect the injector's core features, avoiding damage caused by improper operation. The protocols emphasize the use of bbosch-approved tools, cleaning agents and genuine parts-consistent with the requirement to use OE components for maintaining product performance and warranty validity-to preserve the product's original performance and compliance with Euro 6c emission standards. Strictly following these standards can effectively reduce malfunctions, maintain fuel efficiency, and ensure long-term stable operation in heavy-duty commercial scenarios, maximizing the product's value and reflecting bbosch's commitment to quality, reliability and technical excellence.



ge13
16650-00Z11	109962-0020	109962-0021	109962-0041	109962-0042	109962-0061	109962-0062	0414701033
0414701034

Bosch Fuel Injector Series – Engine – Equipment Application Table

Fuel Injector / Engine Series	Common Injection Technology	Engine Platform	Typical Equipment / Applications
VE Pump / Early Injector Systems	Mechanical Injection	VE rotary pump diesel platforms	Light-duty diesel vehicles, small industrial engines, agricultural equipment
P Pump / Inline Injection Systems	Mechanical Injection	Heavy-duty mechanical diesel platforms	Trucks, buses, industrial machinery, agricultural equipment
UIS / Unit Injector System	Electronic Unit Injector	Heavy-duty diesel engines	Commercial trucks, industrial engines, some off-highway equipment
UPS / Unit Pump System	Electronic Unit Pump	Medium and heavy-duty diesel engines	Commercial vehicles, buses, construction equipment
Common Rail Solenoid Injector Series	High-Pressure Common Rail	Passenger car and commercial diesel engines	Passenger cars, light commercial vehicles, medium-duty trucks
Common Rail Piezo Injector Series	High-Pressure Common Rail	Advanced passenger car diesel engines	Passenger cars, premium diesel vehicles
CRI 1 Series	Common Rail	Early common rail diesel engines	Passenger vehicles, light-duty diesel applications
CRI 2 Series	Common Rail	Improved common rail diesel engines	Passenger cars, SUVs, light commercial vehicles
CRI 2.2 / 2.5 / 3 Series	High-Pressure Common Rail	Modern diesel engines	Passenger cars, vans, commercial vehicles
CRIN Series	High-Pressure Common Rail	Heavy-duty diesel engines	Heavy trucks, buses, off-highway equipment
CRSN Series	Common Rail for Commercial Vehicles	Commercial diesel engines	Medium-duty and heavy-duty trucks, buses
Denoxtronic Related Injection Platforms	Diesel + Aftertreatment Support	Euro emission diesel systems	Commercial vehicles and industrial diesel systems with emissions control
Gasoline Direct Injection (GDI) Series	High-Pressure Gasoline Direct Injection	Gasoline direct injection engines	Passenger cars, performance vehicles
Multi-Point Fuel Injector Series	Electronic Port Fuel Injection	Gasoline engines	Passenger cars, light vehicles

Why Choose Us:

1.after sen ding, we will track the products for you once every two days, until you get the products.

2.Write us for quotation---reply you within 24 hours,one quotation could be ready in 2mins for a ready products!

3.We have our own professional forwarding agent: Fast delivery, serve good.

4. Our feedback: You always can get our feedback within 24 hours.

Contact Detail:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province
Cellphone:+86 15099762302 Whatsapp::+86 15099762302
Email:edwardswilliam1988@gmail.com

Hot Tags: bosch injector ge13 109962-0061 diesel engine diesel common rail fuel injector 9 443 613 820 injector 1099620061 9443613820 original new injector, China bosch injector ge13 109962-0061 diesel engine diesel common rail fuel injector 9 443 613 820 injector 1099620061 9443613820 original new injector suppliers, bosch diesel injector, DIESEL Injector 0414700004, DIESEL Injector 0414700005, DIESEL Injector 0414701084, hho injection, id1200 injectors